REFERENCES ASTM, "E8 Standard Test Methods of Tension ...

M. Ashby and D. Jones, Engineering Materials 1 and 2, Pergamon, Oxford, 1980
David Broek, Elementary Engineering Fracture Mechanics, Martinus Nijhoff, Boston,
1984
T. Courtney, Mechanical Behavior of Materials, McGraw Hill, New York, 1990
J.W. Dally and W.F. Riley, Experimental Stress Analysis, McGraw-Hill, Inc., 1990
G. Dieter, Mechanical Metallurgy McGraw Hill, 1986
T. J. Dolan and C. S. Yen, "Some Aspects of the Effect of Metallurgical Structure on
Fatigue Strength and Notch Sensitivity of Steel" Proc. ASTM, Vol. 48, 664-695, 1948.
N. Dowling, Mechanical Behaviour of Materials, Prentice Hall, New Jersey, 1993
J.F. Doyle & J.W. Philips, eds., Manual on Experimental Stress Analysis, Society for
Exper. Mechanics, 1989
M. M. Frocht, Photoelasticity, Vol. 1, Wiley, 1941.
M. M. Frocht and D. Landsberg, Proceedings of the Society of Experimental Stress
Analysis, 8(2), 149-170, 1951.
H. Fuchs and R. Stephens, Metal Fatigue in Engineering,John Wiley and Sons, New
York, 1980
J. Gere and S. Timoshenko, Mechanics of Materials, , PWS, Boston, 1990
K. Hellan, Introduction of Fracture Mechanics, McGraw Hill, New York, 1985.
R. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, John Wiley
and Sons, New York, 1989.
R. Hibbeler, Mechanics of Materials, Prentice Hall, New Jersey, 1997
A. Higdon, S. Ohlsen, W. Stiles, J. Weese, W. Riley, Mechanics of Materials, John Wiley
and Sons, 1978.
R. Juvinall, Stress, Strain, and Strength, McGraw Hill, New York, 1967
R.C. Juvinall and K. M. Marsheek, Fundamentals of Machine Component Design, 2nd
edition, John Wiley and Sons, New York, 1991.
A.S. Kobayashi, ed., Handbook on Experimental Mechanics, Prentice Hall, Inc.,1992
J. Marin, Mechanical Behavior of Materials, Prentice-Hall, 1962.
A. B. Murphy, "Graphical Solutions for Principal Strains from Measured Strains," Journal
of Applied Mechanics, Vol. 12, p 209, 1945.
R-2