You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DOE/RL-88-21<br />
437 MASF<br />
Rev. 3, 10/01/96<br />
Page 2 of 7<br />
Continued from the front.<br />
r1<br />
111. PROCESSES (continued)<br />
AD^DITIONAL<br />
PROCESS CODES OR FOR DESCRIBING OTHER PROCESS (cod e04'). 'T FOR EACH PROCESS ENTERED HERE INCLUDE DESIGN CAPACITY.<br />
a<br />
C. SPACE FOR ADDITIONAL<br />
A<br />
Zvi<br />
The 437 Maintenance and Storage Facility (43T MASF) was intended to begin<br />
waste management operations in 1989 that included the maintenance and repair<br />
of equipment used in the Fast Flux Test Facility. The 437 MASF also was to be<br />
used to treat dangerous and/or mixed waste (T01) by removing residual sodium<br />
from waste materials. The process was to be conducted by placing sodium<br />
contaminated material in a tank and reacting surface sodium residues with<br />
water.<br />
The 437 MASF never managed dangerous and/or mixed waste and a procedural<br />
closure is being pursued for this unit. The maximum process design capacity<br />
for tank treatment was to be 20 liters (5.3 gallons) per day.<br />
N. DESCRIPTION OF DANGEROUS WASTES<br />
A. DANGEROUS WASTE NUMBER- Enter t he four diyk number train<br />
173-303 WAC for ea ch listed dange rous waste you w<br />
ted<br />
il<br />
l handle. If you handle<br />
tlan mus wanes which are not listed in Chapter 173 .303 WAC, mur the four dig it number(,) that describes the eharaeatlos and/or the toxic con•'<br />
tamPn e ants of those dange ro us wastes.<br />
entered<br />
B.<br />
of waste that w be handled omen annual basis.<br />
FEor each characteristic act+eristic otr toxic emend In colm estimate the total annual of all<br />
contaminant quan lty a ste<br />
y<br />
9 titil the non•Bstsd wa),) that will be handled which<br />
pos ta g e that characte ristic ar comaminmt.<br />
C. UNIT OF MEASURE • For each quantity e ntered In column B e nter the un it of measure code. Un its of measure whi ch must be used and the app ropriate codes<br />
am:<br />
ENGLISH UNIT OF MEA SURE COD EMETRIC UN IT O F MEASURE CODE<br />
POUNDS............ ...... .. P KILOGRAMS................... K<br />
TONS.....................:. T METRIC TONS................... M<br />
If fa cility re cords use any other unit of measure for quantity, the un it s of me asure must be convertad Into one of the. rogWrad units of measure taking Into account the<br />
app rop riate density or specific gravity of the waste.<br />
D. PROCESSES<br />
1. PROCESS CODES:<br />
For fisted donpemut wane: For each lined dangamus wane emoted In column A aelset the code(,) from the li st of process co des co ntained In Section III to<br />
Indicate how the wane w il<br />
l be stated, t re ated, and/or dispo sed of at the facil ity.<br />
For non lined dangerous wa stes: For each characte ris ti c ortaxle contaminant ente re d In Column A, select the eode(al from the get bf p ro ce ss code, contained in<br />
Section III to Indicate all the p rocesses that will be u sed to atom, treat, and/or dispo se .of all the nenHisted dange ro us wastes that possess that characte ristic or<br />
toxic contaminant.<br />
Note: four ,paces as provided for ente ring protons codes. If more are n eeded: (1) Enter the first three as d esc ri bed above; (2) Enter -000' in the extreme ri ght<br />
box of hem IV •D01: and 131 Enter in the space provided on paps 4, the lino number and the add itional codets).<br />
2. PROCESS DESCRIPTION: If a code is not limit for a p rocess that will be used, describe the pmcoss in the spa ce p rovided on the tam.<br />
NOTE DANGEROUS WASTES DESCRIBED BY MORE THAN ONE DANGEROUS WASTE NUMBER - Dange rous wastes that can be desc ribed by man than one Waste<br />
Number<br />
half<br />
dea ctibed on the tone as follows:<br />
1. Select one of the Dangerous Waste Numbers and enter it In column A. On the same line complete column, B. C, and D by es timating the total annual quant ity of<br />
the waste and desc ribing all the p rocesses to be used to treat, store, and/or dispose of t he waste.<br />
2. In co lumn A of the next One enter the other Dang erous Waste Numb er that can be used to desc ribe the waste. In co lumn D(2) an that line enter 'included with<br />
above' and make no other ent ries on that Una.<br />
3. Repeat st ep 2 for ea ch other Dange ro us Wa st e Number that can be used to describe the dange rous waste.<br />
EXAMPLE FOR COMPLETING SECTION N !shown in fine numbers X-1, X-2, X-$ and X-4 below) . A fac il<br />
ity will treat and dir^crio of an estimated 900 pounds per year<br />
of chrome shavings f ro m le ather tanning and finishing operation. In addition, the facil ity will tr eat and diepo0 of three non•fiated wastes. Two wastes era corrosive<br />
only and then will be an estimated 200 pounds par y ear of each waste. The oth er<br />
is croasive corrosiveanA<br />
ign it<br />
able and them will an es ti mated 100 pound, per y ear<br />
of that waste. Treatment wi g be in an incine rator and d isposal will be In a landfill.<br />
D, PROCESSES<br />
1 N<br />
N O<br />
AS &OUS<br />
WASTE NO. B. ESTIMATED ANNUAL<br />
OF MEA<br />
QUANTITY OF WASTE<br />
SURE<br />
lenrcr 1. PROCESS CODES 2. PROCESS DESCRIPTION<br />
E I<br />
)starer coda! code/ !enter! !if a code Is not entered In O!!1/<br />
X• 1 K 1 0 1 5 4 Soo P T 0 3 D d D<br />
X•2 0101012 400 P 7-10'31D'8'0<br />
X•3 O 10101 1 100 P T 0 3 D e 0<br />
X-/ D O 'O 2 T 0 3 D d 0 In cluded with above<br />
ECL30 - 271 - ECY 03031 Form 3 PAGE 2 OF 6 CONTINUE ON PAGE 3
Change language