You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
0<br />
•<br />
DOE/RL-88-21<br />
216-B-63 Trench<br />
Rev. 3, 10101196<br />
Page 2 of 7<br />
Continued from the front.<br />
111. PROCESSES (continwd)<br />
C. SPACE FOR ADDITIONAL PROCESS CODES OR FOR DESCRIBING OTHER PROCESS (.do "TO4'). FOR EACH PROCESS ENTERED HERE INCLUDE DESIGN CAPACITY,<br />
T02, D84<br />
The 216-B-63 Trench began waste management operations in March of 1970. The<br />
216-B-63 Trench received nonregulated process water from the B Plant<br />
chemical sewer. The trench also received corrosive dangerous waste from the -<br />
regeneration of deminera7izer columns in B Plant. Treatment occurred by the<br />
successive addition to the trench of acidic and caustic waste, which served to<br />
neutralize the waste while in the trench. Approximately 473,175 liters<br />
(125,000 gallons) per day of total flow reached the trench. The corrosive<br />
discharges constituted a major part of this flow. This unit has not received<br />
dangerous waste since September 1985 and will close. The 216-B-63 Trench was<br />
stabilized in November 1994 and permanently isolated in December 1994. The<br />
process design capacity reflects the maximum volume of water discharged to the<br />
trench on a daily basis rather than the physical capacity of the unit.<br />
IV. DESCRIPTION OF DANGEROUS WASTES<br />
A. DANGEROUS WASTE NUMBER -Enter the four digit number from Chapter 173 .303 WAC for each listed dangerous waste you will handle. If you handle<br />
dangerous wastes which am not listed In Chapter 173-303 WAC, enter the tout digit numbar(s) that describes the characteristics and/or the toxic contaminants<br />
of those dangerous wastes.<br />
B. ESTIMATED ANNUAL QUANTITY - For each listed waste entered in eokxnn Aestimate the quantity of that wash that will be handled on an annual basis.<br />
For each characteristic or text. contaminant entered M column A estimate the total annual quantity of all the non-listed waste(,) that will be handled which<br />
possess that characteristic or contaminant.<br />
C. UNIT OF MEASURE- For each quantity entered M column B enter the unit of measure code. Unite of measure which must be used and the appropdata wiles<br />
are:<br />
ENGLISH UNIT OF M EASURE CODE METRIC UNIT OF MEASURE CODE<br />
POUNDS....... .............. P<br />
KILOGRAMS......:............ K<br />
TONS......... .... .......... T METRIC IONS............. ... ..M.<br />
If facility records us. any other unit of measure lot quantity• the who of measure must be converted Into ens of the required units of measure taking Into account the<br />
appropriate density or specific gravity of the waste.<br />
D. PROCESSES<br />
1. PROCESS CODES:<br />
listed dangerous<br />
A s elect the code(s) from the Eat of process codes contained in Section lon III<br />
FMkrt ehow andou e<br />
wawaste:<br />
For<br />
o the N b tored disposed e teasthe<br />
facility.<br />
For non-Bated dangerous wastes: For each characteristic at toxic contaminant entered M Column A. select the codo(s) from the list of process codes contained in<br />
Section III to indicate all the processes that will be used to atom, treat, and/or dispose of all the non-listed dangerous wastes that possess that characteristic or<br />
taxi. contaminant.<br />
Note: Four spaces am provided for entering process codes, If seam are needed: (1) Enter the /lest three as described above; (2) Enter -000- in the extreme right<br />
box of Item IV-0(11: and (3) Enter in the apace provided on page 4, the ikm number and the additional codo W.<br />
2. PROCESS DESCRIPTION: If a code is not listed for a process that wig be used, describe the process in the spa ce provided on the fomi.<br />
NOTE: DANGEROUS WASTES DESCRIBED BY MORE THAN ONE DANGEROUS WASTE NUMBER. Dangerous wastes that can be described by mom than one Waste<br />
Number shall be described on the form as follows:<br />
I . Select one of the Dangerous Waste Numbers and enter it In column A. On the same line complete coldmns S. C. and D by estimating the total annual quantity of<br />
the waste and describing all the processes to be used to treat, store, and/or dispose of the waste.<br />
2. In wiumn A of the next line inter the other Dangerous Waste Number that can be used to describe the waste. In column D(2) on that line enter 'Included with<br />
above' and make no other entries on that Ens.<br />
3. Repeat step 2 for each other Dangerous Waste Number that can be used to describe the dangerous watt..<br />
EXAMPLE FOR COMPLETING SECTION IV /shown /n Anc numbers X-1, X-2Y XJ, and X-4 belowl • A facility will treat and dispose of an a•tlmated SOO pounds per year<br />
facility vAI t and dines of threeo nn•lietad 'wastes. Two wastes am corrosive<br />
of ohrom. shavin gs from leather tanning and finishing operation. In addition, the tro<br />
only and there will 6e an estimated 200 pounds par year of each waste. The ether waste B corrosive and Ignitable and there will be an estimated 100 pounds per year<br />
of that waste. Treatment will be In an Incinerator and disposal will be in a landfill.<br />
D. PROCESSES<br />
L IN<br />
N<br />
0 ANGEROU<br />
C. UNIT<br />
WASTE NO.<br />
G. ESTIMATED ANNUAL OSURE<br />
QUANTITY OF WASTE Ian tar 1. PROCESS CODES 2. PROCESS DESCRIPTION<br />
E<br />
(anted<br />
(It • code Is nor entered In DIAL<br />
tenser code) code)<br />
X-1 Soo P T 0 3 D d 0<br />
X•1 100 P T O 3 D 8 0<br />
X-3 too P T D 3 D O O<br />
JOO<br />
X-4 T 0 3 D 8 0 Included w1rh above<br />
ECL30 • 271 - ECY 030.31 Form 3 PAGE 2 OF 5 CONTINUE ON PAGE 3
Change language