ISIS® Software for PHOENIX XT and MENTOR

Output Patch
ISIS ® allows the default screen display to be reversed, so that the display is dimmers
to channels, rather than channels to dimmers.
Operationally, the system is the same, it is just the display that has changed.
Displaying dimmers to channels can be helpful when inspecting the moving light
patch.
examples of keystrokes
� Toggles the screen display to dimmers to channels.
Note: This feature is a toggle function: repeated use of the key will swap
between the two displays.
7.2.3 Deleting the output patch
If a complicated patch is required, it can be easier to start with all DMX outputs
disconnected from the desk control channels. This is called deleting the patch.
examples of keystrokes
� Selects the output patch options from the Channels menu.
� Deletes the patch - channels on the desk will not control any DMX outputs.
A warning is issued:
� A warning is given:The patch will be deleted – Are you sure?
< F8 {yes}>
� Confirms the operation.
7.2.4 Patching a single channel to a single dimmer
The most common patch requirement is to patch one channel to a single dimmer
(DMX) number.
www.adblighting.com Manual – page 43
Issue: 1.01