ISIS® Software for PHOENIX XT and MENTOR

6 SYSTEM SETUP
6.1 Introduction
System Setup
Before using an ISIS ® system for a new show, it can be necessary to configure the
monitor displays, clear any old show information, and configure the hardware
controls and software settings to the operator’s requirements.
ISIS ® is completely user-configurable and allows software options to be hidden from
the operator, preventing inexperienced users from modifying settings. User profiles
can also be added to save preferred configurations for any number of operators.
6.2 Screen configurations
ISIS ® supports up to four local monitors, depending upon the desk hardware, and
four additional network monitors. All monitors can be customised to the operator’s
preference and the screen configuration options provide an ergonomic and enhanced
visual user interface.
Monitor 1 (the default working field monitor) offers fewer possibilities within the
configuration menu, but systems with a single monitor can take advantage of a
number of display possibilities and functions.
Each monitor contains a main ‘Contents’ display, and a ‘Footer’ display, and these
can be selected from a number of options. In addition, the display format can be
changed to suit specific requirements.
Monitor contents and display format can be altered from the Setup menu.
examples of keystrokes
� Allows screen contents and settings to be configured.
� Allows the format of the displayed information to be changed.
www.adblighting.com Manual – page 25
Issue: 1.00