ISIS® Software for PHOENIX XT and MENTOR

More documents

Recommendations

Info

examples of keystrokes � Displays the General Configuration dialogue box. � Enable the audio input by checking the box. Manual – page 22 www.adblighting.com Issue: 1.00 Physical and virtual Faders WHEEL � Moves the cursor to the audio input level. The audio input level can be set between 0% (the input is fully attenuated) and 100%. The fader wheel can be used to set the input level, or it may be entered directly from the keypad. � If the audio input is connected and active, average, bass, mid-range, and treble bargraphs are displayed on-screen to give a visualisation of the audio input level. The optimum level should allow the signal to peak occasionally, but not persistently. The required level will vary between different input sources. � Confirms the operation and closes the dialogue box. 5.11 Using the Wheel to control virtual faders Any of the virtual faders can be temporarily assigned to the fader wheel. However, when the wheel (or belt) is assigned to a virtual fader function, it cannot be used for adjusting intensities. The current wheel assignment is shown in the information bar on monitor 1 above the screen footer. By default this is shown as “Wh Intens” for intensities, but the selected virtual fader is shown in this box when it is assigned to the wheel. Assigning the wheel to control any of the virtual faders is achieved via the function keys. examples of keystrokes � Displays the Wheel virtual assignment options.
� The required virtual fader is selected from the available options: F1 Intensities F2 Submaster Master F3 Flash Master F4 Auditorium F5 DMX Input F6 Audio Input F7 Parameter Control � The function key displays further options: F1 Effect Speed F2 Override WHEEL � Adjusts the level of the selected virtual fader. Note: Do not forget to re-assign the wheel to Intensities before using it to control channels. Physical and Virtual Faders 5.12 Connecting physical submaster faders to virtual faders Any of the submaster faders can be used to control some of the virtual faders described above. These faders are then connected to the virtual faders, and cannot be used to control submasters. Such configuration is made in the Manual Table option of the Menu. examples of keystrokes � Enters the Manual Table configuration dialogue box. OR WHEEL OR � Use the wheel or the down arrow key to highlight the required group of physical faders. � Displays the Extra Faders Edit dialogue box. www.adblighting.com Manual – page 23 Issue: 1.00
Page 1: User Manual Software v. 2.10 ISIS
Page 4 and 5: 1 INTRODUCTION 1.1 Welcome to the I
Page 6 and 7: 1.2 Introduction to using the ISIS
Page 8 and 9: 2 QUICK START GUIDE 2.1 Turning on
Page 10 and 11: 2.8 Assigning memories times Manual
Page 12 and 13: 2.15 Output patch Manual - page 10
Page 14 and 15: Manual - page 12 www.adblighting.co
Page 26 and 27: … Manual - page 24 www.adblightin
Page 30 and 31: example of keystrokes � Enters
Page 34 and 35: The Manual Table configuration util
Page 36 and 37: example of keystrokes � Displa
Page 38 and 39: � Exits the Profile Manager. Manu
Page 40 and 41: � Exits the General Configuration
Page 42 and 43: example of keystrokes � Selects
Page 46 and 47: examples of keystrokes � Enters
Page 48 and 49: Note: Not all hardware platforms ha
Page 52 and 53: The pre-defined dimmer laws availab
Page 56 and 57: Dimmer test dialogue box (Dialogue
Page 58 and 59: 8 SHOW MANAGEMENT 8.1 Introduction
Page 60 and 61: Saving a new show (Dialogue box 120
Page 62 and 63: � Confirms the operation and exec
Page 68 and 69: � Confirms the changes and exits
Page 70 and 71: NAME � Enter the show title, up t
Page 72 and 73: OR Manual - page 70 www.adblighting
Page 74 and 75:
8.9 Restoring a backup from floppy
Page 76 and 77:
Manual - page 74 www.adblighting.co
Page 78 and 79:
examples of keystrokes � Disp
Page 80 and 81:
Page 82 and 83:
9 CHANNEL CONTROL 9.1 Introduction
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
9.9 Channel tracking Manual - page
Page 92 and 93:
� Adds channels 11, 13 & 15 to th
Page 94 and 95:
� Sets groups 1 to 8 at 45%. Manu
Page 96 and 97:
examples of keystrokes � Display
Page 98 and 99:
10.8.3 Deleting groups from the Gro
Page 100 and 101:
� Selects the recover function. M
Page 102 and 103:
Manual - page 100 www.adblighting.c
Page 104 and 105:
� Channel intensities can only be
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
examples of keystrokes Manual - pag
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Flashkey Settings in the Submaster
Page 124 and 125:
Page 126 and 127:
examples of keystrokes � Displ
Page 128 and 129:
Permissible logical groups of subma
Page 130 and 131:
Page 132 and 133:
12.4 Bank Manager Manual - page 130
Page 134 and 135:
examples of keystrokes � Enter
Page 136 and 137:
examples of keystrokes � Displ
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
13.7 Memory times Manual - page 146
Page 150 and 151:
Channel Selection Manual - page 148
Page 152 and 153:
Page 154 and 155:
OR Manual - page 152 www.adblightin
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Screen Configuration dialog box (Di
Page 168 and 169:
14 RECORDING AND MODIFYING TIMES 14
Page 170 and 171:
14.3 Global times Manual - page 168
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
� Gives channel 2 a special time
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
14.6 Times for chasers and effects
Page 184 and 185:
Page 186 and 187:
� Step 3 is channel 2 at 50%.
Page 188 and 189:
� First method: select the memory
Page 190 and 191:
The available effect types are list
Page 192 and 193:
� Loads effect 10 into submasters
Page 194 and 195:
� Re-records the chaser or effect
Page 196 and 197:
The available fade types are listed
Page 198 and 199:
� Changes the mode to back to pos
Page 200 and 201:
15.7 Chasers with moving lights Man
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
� Moves the cursor to the require
Page 214 and 215:
Page 216 and 217:
Editing an effect Manual - page 214
Page 218 and 219:
examples of keystrokes � Displa
Page 220 and 221:
Page 222 and 223:
16 SEQUENCE MANAGER AND EVENTS 16.1
Page 224 and 225:
or on alphanumeric keyboard � Mo
Page 226 and 227:
Page 228 and 229:
16.4 Event types Manual - page 226
Page 230 and 231:
Page 232 and 233:
examples of keystrokes � Exits a
Page 234 and 235:
16.5 Sequence Manager Manual - page
Page 236 and 237:
Page 238 and 239:
� Enter the number of an existing
Page 240 and 241:
Page 242 and 243:
17 PLAYBACKS AND PLAYBACK CONFIGURA
Page 244 and 245:
examples of keystrokes � Copi
Page 246 and 247:
Playback 1 � Allows the range of
Page 248 and 249:
17.6 Playback modes Manual - page 2
Page 250 and 251:
Page 252 and 253:
efore memory 1 is complete � Paus
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
A playback display footer showing a
Page 260 and 261:
18 LIVE 18.1 Introduction Manual -
Page 262 and 263:
There are 3 ways of using the Free
Page 264 and 265:
Page 266 and 267:
Channel Manipulations Manual - page
Page 268 and 269:
Page 270 and 271:
OR … Manual - page 268 www.adblig
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
examples of keystrokes � Selects
Page 278 and 279:
The Parameter Steps Adjustment dial
Page 280 and 281:
Page 282 and 283:
� Each remaining dimmer channel m
Page 284 and 285:
examples of keystrokes {Channels}
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
� Displays the list of the select
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Motion Control Setup Field Setting
Page 306 and 307:
Motion Control Setup Field Setting
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
� Selects instrument 1 (which has
Page 318 and 319:
Page 320 and 321:
other channel manipulations � Add
Page 322 and 323:
examples of keystrokes � St
Page 324 and 325:
Page 326 and 327:
21.3 Initialising instruments ready
Page 328 and 329:
Page 330 and 331:
21.4 Controlling instruments Manual
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
The parameters screen showing some
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
OR … Manual - page 344 www.adblig
Page 348 and 349:
21.10 Motion control functions Manu
Page 350 and 351:
Page 352 and 353:
Using Moving Lights � Selects al
Page 354 and 355:
examples of keystrokes � Clears
Page 356 and 357:
Page 358 and 359:
� Deselects the A group and displ
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
examples of keystrokes: � Sele
Page 366 and 367:
Using Moving Lights 21.16.5 Enterin
Page 368 and 369:
examples of keystrokes � Select
Page 370 and 371:
Page 372 and 373:
examples of keystrokes � Selects
Page 374 and 375:
� Deselects A and B groups and se
Page 376 and 377:
� Confirm the changes and exit th
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
23 EFFECT GENERATOR 23.1 Introducti
Page 384 and 385:
Page 386 and 387:
Phase value 0 - the 12 instruments
Page 388 and 389:
Instruments 11 to 22 are loaded int
Page 390 and 391:
Page 392 and 393:
example of keystrokes … … Manua
Page 394 and 395:
Effect path Down Base Central Base
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
� Exit the macro editing screen.
Page 404 and 405:
examples of keystrokes OR ... Manua
Page 406 and 407:
Page 408 and 409:
24.8.3 Returning a key to its origi
Page 410 and 411:
External Lines dialogue (Dialogue b
Page 412 and 413:
OR wheel or � Use the wheel or t
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
26 DMX INPUT PATCH 26.1 Introductio
Page 422 and 423:
� Patches desk channel 1 to DMX i
Page 424 and 425:
examples of keystrokes � Assig
Page 426 and 427:
examples of keystrokes � Selec
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Copy and Part Functions … …
Page 436 and 437:
examples of keystrokes … Manual -
Page 438 and 439:
28 MIDI Control Manual - page 436 w
Page 440 and 441:
Page 442 and 443:
examples of keystrokes OR � Send
Page 444 and 445:
The order of priority at the Output
Page 446 and 447:
The LTP Configuration settings (Dia
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
… � Navigate to ‘Parameters
Page 454 and 455:
Page 456 and 457:
30.2.2 Selecting touchscreen modes
Page 458 and 459:
Page 460 and 461:
30.5 Dynamic mode (LCD0) Manual - p
Page 462 and 463:
30.7 Output mode (LCD3) Manual - pa
Page 464 and 465:
31.3 List of keyboard functions The
Page 466 and 467:
Page 468 and 469:
32 SYNCHRONISED TRACKING BACKUP 32.
Page 470 and 471:
Page 472 and 473:
33 HELP 33.1 Introduction Manual -
Page 474 and 475:
� Press Help a second time to exi
Page 476 and 477:
34.3 Submasters 34.3.1 The submaste
Page 478 and 479:
34.8.4 Infra-red remote control is
Page 480 and 481:
36 TABLE OF CONTENT Table of conten
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
show all

ISIS® Software for PHOENIX XT and MENTOR

Create successful ePaper yourself

Delete template?

Save as template?