Logical Decisions - Classweb

1. Select the Assess::Common Units option
2. LDW will display the Common Units dialog box that
identifies the method used to define each measure’s
SUF.
3. Select "Power" from the combo box at the top of the
dialog box and make sure that the selected assessment
method is "SUF."
4. Click on the Assess button to begin the assessment
process. You should see a display like the one in Figure
4-4.
Figure 4-4. Initial display for assessing Power SUF.
Entering the Mid-Preference Level. To tell LDW that your midpreference
level is 130 hp you will use the split range option. The
split range option splits the current range (the range highlighted in
green -- initially the whole range from 109 hp to 175 hp to start)
into two parts. You want to split the range at the mid-preference
level of 130 hp. This lets you tell LDW the utility to assign to 130
hp. It will also let you make further modifications to the SUF curve
above and below 130 hp in a moment. Here’s how to split the
SUF:
4-12 Section 4 -- Introductory Tutorial