CATALOG MOSTEK

COMPACT AND LIGHT-WEIGHT THERMAL MASS FLOW TRANSMITTER MF250 SERIES FOR LIGHT 

INDUSTRY, OEM DESIGN. 

TYPE : INSERTION ACCURAY : +/- 1.0 % FS 

PROBE LENGTH : FROM 4 INCH AND ABOVE LINEARITY: +/- 0.2% FS 

APPLICABLE PIPE DIAMETER : MINIMUM 1 INCH RANGEABILITY : 100 : 1 

PROBE MATERIAL : SUS 316 RESPONSE TIME : 0.9 SEC 

SENSOR METRIAL : SUS 316 OUTPUT : 4-20 mA 3-WIRE OR 4-WIRE 

DISPLAY : LED RED COLOR 4 DIGIT 

WEATHER-PROOF NEMA 4X, THERMAL MASS FLOW METER, MULTIPLE POINT AVERAGING FOR STACK, 

INCINERATER, LARGE DUCT, CEMS, TELEMETERING SYSTEM, MF300 

POWER SUPPLY : 220 VAC RANGEABILITY : 100 : 1 

DISPLAY : LED RED COLOR RESPONSE TIME : 0.9 SEC 

OUTPUT : 4-20 mA 3-WIRE OR 4-WIRE, RS485 LINEARITY: +/- 0.2% FS 

ACCURAY : +/- 1.0 % FS 

THERMAL MASS FLOW AND LEVEL SWITCH FL2200 SERIES FOR LIGHT & OEM INDUSTRY 

. Sensor Type : Hermetically Sealed Cylinderical Stainless Steel Sensor 

. Flow Media : Air 

. Max Velocity : 0 ~ 30 NMPS ( Normal Meter Per Second ) 

. Output : SPDT 5 Amp Relay Output 

. Power Supply: 15 VDC ±10% 

MOSTEK PRODUCT 

FLOW 

EXPLOSION-PROOF THERMAL MASS FLOW METER MF100 SERIES 

PRESSURE : 500 PSI ( MAXIMUM ) ACCURAY : +/- 1.0 % FS 

POWER SUPPLY : 220 VAC OR 24 VDC RESPONSE TIME : 0.9 SEC 

DISPLAY : 16 X 2 LCD OUTPUT : 4-20 mA 3-WIRE OR 4-WIRE, PULSE 

TOTAL 10 DIGIT, FLOW 8 DIGIT 

LINEARITY: +/- 0.2% FS RANGEABILITY : 100 : 1 

WEATHER-PROOF MASS FLOW METER, MF200 SERIES 

POWER SUPPLY : 220 VAC OR 24 VDC LINEARITY: +/- 0.2% FS 

DISPLAY : 16 x 2 LCD RANGEABILITY : 100 : 1 

TOTAL 10 DIGIT, FLOW 8 DIGIT RESPONSE TIME : 0.9 SEC 

OUTPUT : 4-20 mA 3-WIRE OR 4-WIRE, PULSE , RS485 

ACCURAY : +/- 1.0 % FS 

. Sensor : Stainless Steel SST316L Encapsuled Platinum RTD . Power Supply : 24 VDC ±10% 

. Fluid : Air, Inert Gas, Liquid, Mist . Pressure : 25 Kg/Cm2 Max 

. Max Velocity : 0~250 NMPS ( Air) 0~10 MPS ( Liquid) . Accuracy : ±1.0% FS 

. Output : SPDT 5 Amp 

AIR FLOW SWITCH FOR ULTRA LOS COST FL2210 SERIES FOR HVAC DUCT MOUNTING 

. Accuracy : ±5.0% FS 

AIR FLOW METER FL2110 SERIES FOR HVAC, LIGHT INDUSTRY, OEM DESIGN. 

DISPLAY : LED RED COLOR 3-1/2 DIGIT 

OUTPUT : 4-20 mA 3-WIRE OR 4-WIRE 

ACCURAY : +/- 3~5 % FS 

LINEARITY: +/- 0.2% FS 

RANGEABILITY : 10 : 1 

RESPONSE TIME : 0.9 SEC 

ELECTROMAGNETIC FLOW METER INLINE TYPE FLOMID FX SERIES 

Modular design in two versions : 

. Compact , sensor and electronics unit forming a single unit 

. Separate, sensor and electronics separated , joined by a cable 

Flow rate measurement is independent of the flow profile 

Can be mounted in any position, provided that the pipe is always full.

ELECTROMAGNETIC FLOW METER INSERTION TYPE FLOMAT SERIES 

. Pressure rating PN16 . Special order : Titanium, Zirconium 

. Liquid Temperature range . Field coil current : 130 mA 6.25 / 7.5 Hz 

PVDF Head : -20 ^C to +130 ^C . Liquid Conductivity : > 20 uS/cm 

. Electrode . Accuracy : +/- 3.5% 

Standard : Hastelloy C 

All metal construction SS ( AISI 316L ) 

. Flow rate for : 

- Water : 0.1 l/h up to 1000 l/h 

- Air : 4 Nl/h up to 30 Nm3/h 

- 1 ro 2 Alarm settings ( Hi/Lo Flow ) 

- 4-20 mA output ( 2-wire system ) 

TURBINE FLOW METER TM44 SERIES FOR LIQUID MEASUREMENT 

Accuracy better than +/- 0.5% 

Body : EN 1.4404 ( SS 316L ) 

Flow Rate: Water 100 l/h up to 6700 m3/h 

. Connection 

- Standard: Flanges EN 1092-1, PN40......PN16 

- On request up to PN200, ANSI Flanges, BSP, NPT thread etc 

METAL TUBE AREA FLOW METER COMPACT TYPE M21 SERIES FOR GASES, LIQUIDS AND STEAM 

METALIC TARGET FLOW METER DP65/DP 500 SERIES FOR LIQUID AND GASES 

- Flow rate: Water : 0.8 m3/h up to 1600 m3/h 

Air : 45 Nm3/h up to 24000 Nm3/h 

- Low pressure drop 

- Straight pipe requirement of only 3 x DN before & after 

- Provides a good measurement for fluids containing suspended solid 

DISPLACEMENT TYPE FLOW METER VOLUMEMETRIC COUNTER COVOL SERIES 

- Working pressure manufacturing according to PED 97/23/CE 

- Precision +/- 0.8 % 

- Construction in EN 1.4404 ( SS 316L ) , PVC, PP, PTFE 

- Size DN10 to DN100 

- Viscosity up to 120,000 mPas 

PLASTIC TUBE TYPE VARIABLE AREA FLOW METER 2000 SERIES 

Measurement of Low GAS & Liquid Flows 

- Regulating valve with a tappered plug and fine thread for precise flow adjustment 

- Compact construction with reduced dimensions to facillate easy installation and 

mounting on the control panels 

- Scales calibrated in flow unit of l/h, %, l/min or cc/min 

- High & low flow alarms ( Optical, inductive or hall sensor ) 

GLASS TUBE TYPE VARIABLE AREA FLOW METER 6000 SERIES 

. Easy installation , no straight pipe required . Steel construction, coated with Polyamide 11 

. Low pressure drop . Connection in steel , EN 1.4404 ( SS 316L ) PVC, PTFE etc 

. Scaled directly in l/h, l/min, kg/h, % etc 

. Adjustable limit switch , in all scales, operated magnetically or with infrared light. 

. Flow measuring tube in borosilicate glass 

CLEAR PLASTIC TUBE TYPE VARIABLE AREA FLOW METER PT-11/PT-12 SERIES 

. Excellent readability . High & Low Flow Switches 

. Scaled directly in l/h, m3/h, % etc . 4-20 mA Output ( 18 points max ) 

. Pressure up to 15 bar 

. Simple installation ( flanged , threaded or glued connections ) 

. Light weight 

. Temperatures up to 60 Deg C+ TROGAMID* , and 90 Deg C+ POLYSULFONE

LEVEL 

DIFFERENTIAL PRESSURE LEVEL TRANSMITTER LD400 SERIES, HART PROTOCOL 

HART - 4 a 20 Ma 

± 0.045% Accuracy 

. ± 0.2% of URL Stability - Guarantee For 12 Years 

. 200:1 Rangeability 

. 35 ms Total Response Time 

. Non-volatile Flow Totalizer 

MICRO WAVE GUIDED TIME DOMAIN RADAR LEVEL TRANSMITTER LTDR SERIES 

4-wire sensor with - Single Rod, Coaxial Rod, Rope Probe 

Material : EN 1.4404 ( AISI316L ) 

. Measuring range 

- Single rod probe 100 .......... 3000 mm 

- Coaxial probe 100 .......... 6000 mm 

- Rope probe 100 ......... 20000 mm 

. 4-20 mA output & 1 x programmable transistor output for level switch 

ULTRASONIC LEVEL TRANSMITTER LU90 SERIES 

Compact design with polycarbonate housing ( Electronics & Display ) 

Easy to program by means of keyboard -display 

Resolution : 1 mm 

Accuracy : +/- 2 mm ( Between 0.3 and 2 meter ) 

Measuring Distance: Liquid 12 m, Solid 7 m 

Continuous level measurement , with 4-20 mA output 

SPRING BALANCED TYPE DISPLACEMENT LEVEL TRANSMITTER LP80 SERIES 

Standard construction in EN 1.4404 ( SS 316L ) 

Range of measurement : 300 mm to 6 meter 

Indication by means of magnetic coupling 

Linear scales in % or height 

Connections : - Standard : DN40 DIN Flange 

- Other flange standards on request ( ANSI, JIS ) 

VISUAL INDICATION LEVEL TRANSMITTER LT10 SERIES 

Materials in EN 1.4404 ( SS 316L ), PVC, PP, PVDF or PTFE for most application in industries such as :Chemical , 

petrochemical and other processes, Refrigeration, Retorts and Heat Treatment, Boilers, marine & industrial 

. Full process isolation, no risk of leakage 

. Alarms contacts adjustable over the full range 

. Clear indication with magnetic float or magnetic strips 

. Transmitter output ......... 0...4-20 mA 

. Excelent chemical and mechnical resistance 

SIDE MOUNTING TANK LEVEL SWITCH LC40 SERIES 

The series LC40 level switch for liquids uses a float to activate a micro-switch 

Suitbale for : 

. Dosing tank . Hot water storage tanks 

. Control of condensation/steam separation . Lubricating & hydraulic oil tank/sumps 

. Pump control . Hi/Lo Level alarms 

. Up to 300 Deg C+ . Up to 400 400 bar 

MULTI-POINT FLOAT LEVEL TRANSMITTER LE70 SERIES 

Series LE70/LEM70 is a Level Transmitter with 0... 4-20 mA analog output. 

Available in the corrosion resistant material of EN 1.4401 ( SS 316L ), PVC, PVDF, PTFE or PP . 

It is designed for : 

. Food products . Level control in tanks for chemical dosing 

. Process tanks . Tank farms with centrailsed monitoring 

. Stop/Start of pumps for level control . Control of tanks ( available capacity & level alarms )... 

VIBRATION TUNING FORK TYPE LEVEL SWITCH LD60 SERIES 

Level Switch for Solids and Liquids Vibrating Fork System 

Suitable for liquids with viscosity up to 10,000 cSt 

Minimum density 0.6 kg/l 

. Corrosion resistant materials 

. Maintenance free 

. Selection of normally open or normally closed operation

PRESSURE 

GAGE PRESSURE TRANSMITTER PRESSURE LD290 SERIES 

0 ~ 125 Pa to 0 ~ 25 MPa 

0 ~ 0.5 inH20 to 0 ~ 3600 psi 

± 0.075% Accuracy 

40:1 Rageability. Two-wire, 4-20 mA with HART superimposed digital communication signal 

Wetted parts in 316 SS, Hastelloy, Digital LCD display 

Pressure: 6,000 psi (414 Bar) 

Temperature: -50°C to +200 °C (PTFE Sealing) 

Internals: PTFE 

Threads: NPT or BSP 

Conection to Manifold: 1/2 " 

MANIFOLD VALVE FOR PRESSURE TRANSMITTER 

CAPILLARY DIAPHRAGM REMOTE SEAL SR301 SERIES 

FOR DIFFERENTIAL PRESSURE LEVEL TRANSMITTER 

The SR301S is a seal for food and other application where sanitary connections are required. The diaphragm is 

welded to the housing and the connection to the process can be threaded or "Tri-Clamp" type, that allows an easy and 

quick connection/disconnection of the equipment from the process. The flush connection enables rising of the diaphragm 

to remove deposits without disconnecting the seal. 

LOCAL ADJUSTMENT USING THE MAGNETIC TOOL 

LD400 is available in HART technology. 

These instruments can be configured with SMAR software and other manufacturer configuration tools. 

Local adjustment is available in all LD400 HART Pressure Transmitters. It is possible to configure zero and span, 

totalization, setpoint and other control functions using the magnetic screwdriver. 

GAGE PRESSURE TRANSMITTER PR1134 SERIES FOR HIGH RANGE 

. Accuracy ±0.25% 

. 4-20 mA – 2 wire output 

. RFI & EMI immunity with IP67 protection 

. Built-in Temperature Compensation Circuit 

. Compact Size and easy to wire with remote cable 

. Very suitable for corrosive liquid and most chemicals 

. Rugged stainless steel housing and wetted parts 

GAGE PRESSURE TRANSMITTER PR1123 SERIES FOR MEDIUM RANGE 

Accuracy ±0.25% 




. Compact Size and easy to wire with DIN connector 

. Very suitable for corrosive liquid and most chemicals 

. Rugged stainless steel housing and wetted parts 

DIFFERENTIAL PRESSURE TRANSDUCER FOR LOW RANGE PR2115 SERIES 


. 0.5-4.5 VDC output 

. Minimized Power Consumption 

. RFI & EMI immunity 


GAGE PRESSURE TRANSMITTER FOR MEDIUM RANGE PR4124 SERIES 

FOR IMMERSION LEVEL MEASUREMENT 




. Built-in Temperature Compensation Circuit

HEAD MOUNT TYPE TEMPERATURE TRANSMITTER FOR PIPE MOUNTING TE3101 SERIES 

Light weight case, easy to install into the duct 

Accuracy ±0.2 % 

4-20 mA DC 2-wire analog output 

Wide measuring range 

Pt RTD, Thermistor sensor 

TEMPERATURE TRANSMITTER FOR PIPE MOUNTING , TE3100 SERIES 

Light weight case, easy to install into the duct 




Pt RTD, Thermistor sensor 

TEMPERATURE CONTROLLER FOR FOR DUCT MOUNT, TE230 

Proportioinal Control 

4-20 mA 4 Wire Analog Output 

Standalone operation with remote monitoring option 

0.2% accuracy 

Any RTD or thermocouple 

TEMPERATURE MULTIPLE DISPLAY FOR PANEL FOR HVAC , TE5584 

3-1/2 Digit Local LED display 

Up to 8 Channels 

Remotely Temperature management 

Cost effective 

Platinum RTD or Thermocouple, Thermistor 

Wide operating range 

4-20 mA 2-wire analog output 

Low cost and fast delivery 

0.2% accuracy 

Any RTD or thermocouple , Thermistor 

Weather-Proof IP-67 

TEMPERATURE 

2-WIRE RTD TEMPERATURE TRANSMITTER FOR HEAD MOUNT TE5100 SERIES 




Pt - RTD sensor 

Span & Zero Adjustment 

TEMPERATURE TRANSMITTER FOR OUTDOOR, HVAC, TE4100 

TEMPERATURE AND HUMIDITY TRANSMITTER FOR CEILING MOUNTING, HVAC, TH6105 

Temperature: -Sensor type : RTD, Thermistor Humidity: -Sensor type : capacitance 

-Internal calibration : +/- 0.2 % -Range : Operating 10 to 95% RH 

-Operating temperature : -20 to + 70^C -Calibration : 0 to 100% RH 

-Accuracy : +/-1,2 or 3% at 25 degree C 

Output: 4-20 mA 

TEMPERATURE TRANSMITTER FOR WALL MOUNTING, HVAC, TE110 

Initial calibration : +/- 0.2% - Supply voltage : 15 to 30 VDC ( nominal ) 

Linearity : +/- 0.1% of span - Output : 4 to 20 mA in 2-wire technology 

Operating Temperature : -20 to + 70^C - Maximum load : (V supply-12)/20mA 

Temperature drift : less than 0.012% span / deg C 

TEMPERATURE & HUMIDITY TRANSMITTER FOR DUCT, HVAC, TH2100 

Temperature: Humidity: 

Sensor type : RTD, Thermocouple Sensor type : capacitance 

Internal calibration : +/- 0.2 % Range : Operating 10 to 95% RH 

Operating temperature : -20 to + 70^C Calibration : 0 to 100% RH 

Load error : 0.02% max of full scale per 100 ohms Accuracy : +/-1,2 or 3% at 25 degree C

HUMIDITY 

ROBUST DESIGN, COST EFFECTIVE TEMPERATURE AND HUMIDITY TRANSMITTER 

FOR OUTDOOR, TH4100 

Temperature Humidity: 




Load error : 0.02% max of full scale per 100 ohms Accuracy : +/-1,2 or 3% at 25 degree C 

HUMIDITY TRANSMITTER FOR OUTDOOR, HVAC, HU4100 

Range : Operating 10 to 95% RH Output : 4-20 mA in 2-wire technology 

Calibration : 0 to 100% RH Load : 250/500 ohms +/-0.1% at 12/24 VDCsupply 

Accuracy : +/-1,2 or 3% at 25 degree C Power supply : 24 VDC +/- 10% 

Temperature dependence : 0.2% RH per degree C Operating temperature : 0 to 60 ^C for 0-100% RH 

Response time : less than 1 minute from 95% to 10% RH Storage tempaerature : -20 to +70 ^C for 0-100% RH 

HUMIDITY CONTROLLER FOR ROOM, HVAC, HU1300 

. Sensor type : Capacitance . Response time : less than 1 minute from 95% to 10% RH 

. Range : Operating 10 to 95% RH . Output : 4-20 mA in 4-wire technology 

. Calibration : 0 to 100% RH . Load : 250/500 ohms +/-0.1% at 12/24 VDCsupply 

. Accuracy : +/-1,2 or 3% at 25 degree C . Power supply : 24 VDC +/- 10% 

. Temperature dependence : 0.2% RH per degree C 

TEMPERATURE AND HUMIDITY TRANSMITTER FOR WALL MOUNTING, HVAC, TH1100 

Temperature: Humidity: 




Load error : 0.02% max of full scale per 100 ohms Accuracy : +/-1,2 or 3% at 25 degree C 

HUMIDITY TRANSMITTER FOR WALL MOUNTING , HVAC, HU1100 






HUMIDITY TRANSMITTER FOR DUCT, HVAC, HU2100 






HUMIDITY CONTROLLER FOR DUCT, HVAC, HU2300 

Sensor type : Capacitance Output : 4-20 mA in 4-wire technology 

Range : Operating 10 to 95% RH Load : 250/500 ohms +/-0.1% at 12/24 VDC supply 

Calibration : 0 to 100% RH Power supply : 24 VDC +/- 10% 

Accuracy : +/-1,2 or 3% at 25 degree C Operating temperature : 0 to 60 ^C for 0-100% RH 

Temperature dependence : 0.2% RH per degree C Storage tempaerature : -20 to +70 ^C for 0-100% RH 

Response time : less than 1 minute from 95% to 10% RH

VIBRATION 

MINI VIBRO MODEL-1022A VIBROMETER WITH ANALYZER 

* Measurement full scale range (10 dB step,5 ranges) 

a)Acceleration range 0.3,1,3,10,30m/s2PEAK 

b)Velocity range 1.3,10,30,100mm/sRMS 

c)Displacement range 10,30,100,300,1000µmp-p 

* Rectifier True RMS 

* Indication Acceleration…EQ Peak Velocity…True RMS Displacement…EQ P-P 

* Frepuency range 10-1000Hz 

* Analysis filter 10-1000Hz Q=10 

* Accuracy Within 3% on the amplitude measurement of sinusoidal wave 80Hz 

10mm/sRMS 

* AC Output ±1V/F.S 

* DC Output(option) +1V/F.S 

PORTABLE SERVO VIBRATION METER 1200 SERIES 

* Applicable Detectors : Model-2200 servo-type accelerometer 

* Measurement Range * Frequency haracteristics 

a) Acceleration ±0.03 , 0.1 , 0.3 , 1,3 , 10, 30m/s2FS DC ACC: DC-100Hz ±5% max 

b) Velocity ±0.1 , 0.3 , 1 , 3 , 10 , 30 , 100cm/sec FS AC ACC: 1Hz-100Hz ±5% max 

c)Displacement 0.1 , 0.3 , 1 , 3 , 10 , 30 , 100mm P-P FS AC VEL: 1Hz-100Hz ±10% max 

Switchable in seven 10dB steps AC DISP: 1Hz-100Hz ±10% max 

* Accuracy: 3% max. for AC 16Hz 10m/s2 * Output: ±1V/FS(10KΩ), ±5mA/FS(20Ω) 

AC 100V±10% 50/60Hz 10VA 

PORTABLE DIGITAL DISPLAY VIBROMETER DIGIBIBRO 1332A 

* VIBRATION PICKUP: Piezo Electric Pickup Model-2304A 

* INPUT: BNC connection Charge input 

* ACCELERATION RANGE: 0 to 199.9m/s2 

* VELOCITY RANGE: 0 to 199.9mm/s(RMS) 

* DISPLACEMENT RANGE: 0 to 1.999mm(p-p) 

* FREQUENCY RANGE: 10Hz to 5000Hz ±5%(Acc:5Hz-) 

* ACCURACY: Acceleration 3% of Rdg± 1digit (at 80Hz, half of FS) 

* STABILITY AGAINST TEMPERATURE: +0.15% of Reg /°C(typ) 

* AC OUTPUT: 

Output Resistance 1kΩwith mini-plug 

Acceleration :10mV/(m/s2)±2Vmax 

velocity: 10mV/mm/s ±2Vmax 

Displacement :2V/mm ±2Vmax 

Noise level : 1mV rms max 

PORTABLE DIGITAL SHOCK METER, PEAK HOLF TYPE 1340 

(1)INPUT TRANSDUCER Piezoelectric pickup Model 2304A Approx.50pC/m/s2 

(2)INPUT TERMINAL Charge input type,BNC connector 

(3)MEASURING RANGE 1-1999m/s2 (Option:0.1-199.9m/s2(Peak)) 

(4)RESOLUTION 1 m/s2(Peak) (Option:10m/s2(Peak)) 

(5)FREQUENCY RANGE 500Hz-5KHz,Within 5% 

(6)LOW-PASS FILTER Cut-off frequency 500Hz(-3dB),-12dB/OCT 

(7)ACCURACY 3% of reading,±1m/s2 (80Hz sine wave,100m/s2 vibration,23°C±3°C) 

(8)DETECTION METHOD VIBRATION Detection of absolute value of sine wave alibration, 

peak value indication. 

SHOCK Detection of mean value,peak hold. 

Releasable by reset button. 

Peak hold is effective for acceleration of 10m/s2 

(For optional specifications,peak hold is effective for 100m/s2 

(9)RESET FUNCTION For use in SHOCK MODE to clear held value. 

(10)AC OUTPUT 100mv/(m/s2),±2V,output resistance 1KΩ,mini-plug. 

(Option:10mv/(m/s2)

PORTABLE ANALOG VIBRATION METER MINIVIBRO FOR LOW FREQUENCY 1422 

* Measuring full scale range (5range by 10dB step) 

a) Acceleration range 0.3,1,3,10,30m/s2(Peak) 

b) Velocity range 0.1,0.3,1,3,10cm/s(Peak) 

c) Displacement range 0.1,0.3,1,3,10mm(P-P) 

* Frequency characteristics 2-100Hz within±5% 

* Stability Sine wave 16Hz, within 2% at acceleration measurement 

* Error of range changeover within 2% 

* Meter Double scale of 0-1 and 0-3 and BATT mark, 

* Accuracy within 2.5% of full scale 

* Output AC output ±1V/FS 

VIBRATION SWITCH SURFACE MOUNT 1500A 

* Alarm setting range: 1.Acceleration: 1-99m/s2(p) (Select 1,2 or 3.) 

2.Velocity: 1-99mm/s2(p) 

3.Displacement: 001-0.99mm(p-p) 

* Flequency characteristics: Acceleration: 5-500Hz (+5%, -10%) 

Velocity: 10-500Hz 

Displacement : 10-500Hz 

* Accuracy: Within 5% (25°C , 80Hz, 10m/s2) measurement of 

sinusoidal wave) 

* Linearity: Within 1% of full scale 

* Driving power supply: DC24V±0.5V, 12mA(Typ), 20mA(max) 

* Relay opelation: Delay 0 to 60 sec variable 

Self-holding operation and automatic resetting operation, 

make contact by MOSFET. 

(Resetting by turning off driving power supply) 

Contact rating AC/DC 125V, 0.5A 

EXPLOSION-PROOF SURFACE MOUNT VIBRATION SWITCH 1500-EX 

* Alarm setting range 1. Acceleration1-99m/s2(Peak) (Select 1 , 2 or 3) 

2. Velocity1-99mm/s(Peak) 

3. Displacement0.01-0.99mm(P-P) 

* Frequency range 10-2000Hz(±10%) 

* Accuracy Within 5% (at 25°C,80Hz,10m/s2 measurement of sinusoidal wave ) 

* Linearity Within 1% of full scale 

* Driving power supply AC or DC100-220V(less than 10VA) 

* Relay operation Delay 0 to 60 sec variable Self-holding operation and automatic 

resetting operation , make contact by solid state relay. 

(Resetting by turning off driving power supply) 

Contact rating AC/DC 125V,0.5A 

PANNEL MOUNT ANALOG VIBRATION MONITOR 1590 

* Measuring contents 

1590-01 Seismic vibration displacement 

1590-03 Indicating the larger displacement of the two radial 

displacements of a rotor. 

* Frequency range 

1590-01 5Hz-50Hx ±5% 

1590-03 2Hz-100Hz ±5% 

* Measuring range 0-600µmp-p/FS 

* Indicator scale Same as the above. Minimum scale is 1/30 of FS and GAP 0-4mmp-p. 

* Signal input Terminal on the rear panel. 

Input sensitivity conforms to TQ402/IQS452 

* Monitor output 10Vp-p/FS, Load: 500Ωmax. 

1590-01: Displacement wave signal, Terminal of the front panel. 

1590-03: Displacement wave signal of X,Y direction. 

BNC connector of the front panel.

OTHERS 

HERMATICALLY SEALED STAINLESS STEEL EXPLOSION-PROOF PROXIMITY SWITCH GO-SWITCH 

* Measuring method : Electro-chemical Technology 

* Accuracy : ± 2.0 % FS 

* Power Supply. : 24 VDC ±10% 

* Output : 4-20 mA DC, Volt, or RS485 ( option ) 

* Repeatability : ± 1.0% 

* Response Time : less than 90 sec 

* Sensor Life Time : > 2 Years 

* Range : 0-100 ppm 

* Mounting Location : 30 Cm under from the ceiling 

* Measurinfg area : 180 M² ~ 280 M² ( in ideal condition ) 

* Display : 4 Digit LED ( option ) 

CO2 TRANSMITTER CD1105 SERIES FOR WALL MOUNT , HVAC, BUILDING AUTOMATION SYSTEM 

. Measuring method : Non-Dispersion Infra-Red 

. Accuracy : ± 3.0 % FS 

. Power Supply. : 24 VDC ±10% 

. Output : 4-20 mA DC, Volt, or RS485 

. Linearity : ±0.1% , Repeatability : ±20 ppm 

. Range : 0-1000 ppm, 0-3000 ppm, 0-5000 ppm 

. Response Time : 100% in 30 seconds 

. Display : 4 Digit LED ( option ) 

SMOKE DETECTOR SD6200 SERIES FOR CEILING MOUNT 

* Sensor Type : Photo-Coupler 

* Measuring Range : 60 SqM ( under 4 meter height ) 

* Power Supply : 24 VDC 

* Alarm Output Signal : 1 x SPDT 5 Amp Relay Contact 

* Indication Lamp : Alarm On 

* Latching SCR Signal : Reset Switch in Main Board 

* Operating Temperature : -10 ºC ~ 60 ºC 

* Humidity : 0 ~ 95% RH 

OXYGEN ( O2 ) TRANSMITTER OX2100 SERIES FOR DUCT MOUNTING, HVAC, 

BUILDING AUTOMATION SYSTEM 

* Measuring method : Electro-Chemica Technology 

* Accuracy : < 2 Vol % +/- 0.1%, < 25 Vol % +/- 0.5%, < 100 Vol % +/- 1.0%, 

* Power Supply. : 24 VDC ±10% 

* Output : 4-20 mA DC, Volt, or RS485 ( optional ) 

* Expected Operating Life : > 4 year @ ambient air 

* Range : 0-100 Vol % 

* Response Time : 100% in 5 seconds 

* Warming-Up Time : None 

* Display : 4 Digit LED ( option ) 

AMMONIA ( NH3 ) TRANSMITTER AM1105 SERIES FOR WALL MOUNT , HVAC, 

BUILDING AUTOMATION SYSTEM 

CO2 TRANSMITTER CD2105 SERIES FOR DUCT MOUNTING, HVAC, BUILDING AUTOMATION SYSTEM 

. Measuring method : Non-Dispersion Infra-Red . Range : 0-1000 ppm, 0-3000 ppm, 0-5000 ppm 

. Accuracy : ± 3.0 % FS . Response Time : 100% in 5 seconds 

. Power Supply. : 24 VDC ±10% . Warming-Up Time : None 

. Output : 4-20 mA DC, Volt, or RS485 . Display : 4 Digit LED ( option ) 

. Linearity : ±0.1% , Repeatability : ±20 ppm

PROPORTIONAL ON-OFF ELECTRIC DAMPER ACTUATOR FOR HVAC DA2300 SERIES 

Power Supply : 24 VDC/AC ±10%. . Frequency : 50 Hz or 60 Hz 

. Consumption Power : 3.5 VA . Rotation Angle : 0° ~ 90 ° 

. Commend Signal : 0-10 VDC ( 4-20 mA Option ) , On/Off . Damper area : 6 sq M 

. Torque : 20 NM , 30 NM . Running Timing : 0 to 80 sec (0-100%) 

. Rotor Direction: Direction selector switch installed . Cable : 0.75 sqmm 3p 60 Cm 

CARBON MONOXIDE TRANSMITTER FOR OUTDOOR, HVAC, CM4200 

Measuring method : Electrochemical Range : 0-1000 ppm 

Accuracy : ± 3.0 % FS Response Time: 100% in 3 seconds 

Power Supply: 24 VDC ±10% Display : 4 Digit LED ( option ) 

Linearity : ±0.2% , Repeatability : ±5 ppm Relay Contact : SPDT 5 Amp Relay Contact 

Output : 4-20 mA DC, 0-10 Volt 

MANUAL DAMPER CONTROLLER FOR DUCT MOUNTING, HVAC, DM2300 

Power Supply : 24 VAC / 220 VAC Operating Time : 100 sec 

Frequency : 50 Hz or 60 Hz Torque : 15 NM 

Consumption Power : 3.5 VA Rotation Degree : 0 to 95 ^ 

Output Signal : On/Off ( option 0-10 VDC ) 

Orientation of Rotator : Orientation selectable switch included 

SMOKE DETECTOR FOR DUCT MOUNTING, HVAC, SD2200 

Power-on, sensor failure, alarm LED Aux alarm device alarm contact 

Simple test & reset function Built-in dust filter 

Two high current control alarm contact Low current initial alarm contact

CATALOG MOSTEK

Create successful ePaper yourself

Delete template?

Save as template?