Montageanleitung Assembly instructions ... - Villeroy & Boch

3. Assembly
3.12. Stove safety grille
Wall assembly
Note that the indicated minimum clearances must be maintained.
. For details of minimum clearances, see stove assembly instructions and/or plate
fixed to stove.
The stove safety grille consists of (fig. 27):
d a front section
d two side sections
d two base sectionsn
d acover
d four screws (3 x 25)
d eight screws (5 x 70)
d eight plugs (12 x 40).
1. Align the two side- and front-sections in an
upright position with the plug hole before fitting.
2. Secure the two side sections and front section to
the two foot sections with eight screws (5 x 70)
and eight plugs (12 x 40).
3. Attach the cover to the stove safety grille with
wooden plugs (6 x 30, supplied) and glue.
4. Mark the four fixing positions in accordance with
the specified clearances as per OK FFB 450.5 mm
+ 805.5 mm and at a distance of 662 mm on the
wall element.
5. Make four fixing holes with a ø 2 mm drill at the
specified points.
6. Insert four screws (3 x 25) into the wall elements
(fig. 27 + 27.1).
7. Fit the stove safety grille to the four screws in the
wall elements (fig. 28).
Cover
Screw 5 x 70
Screw 3 x 25
Plug 12 x 40
SX-line
Fig. 27
PAGE 46 5000149/10.05
450,5
805,5
OK FFB
Top plug holes
662
Stove
Stove
Fig. 27.1
Fig. 28