Technical Product Specification for Canoe Pass - Preminary - Intel

Intel ® Server Board S2600CP Connector/Header Locations and Pin-outs
Intel ® Server Board S2600CP and Server System P4000CP TPS
7.6.3 Video Connector
The following table details the pin-out definition of the external VGA connector.
76
Table 43. Video Connector Pin-out details
Pin Signal Name
1 CRT_RED
2 CRT_GREEN
3 CRT_BLUE
4 N/C
5 GND
6 GND
7 GND
8 GND
9 P5V
10 GND
11 NC
12 CRT_DDCDATA
13 CRT_HSYNC
14 CRT_VSYNC
15 CRT_DDCCLK
Figure 22. Video Connector Pin-out
Note: Intel Corporation server boards support peripheral components and can contain a number
of high-density VLSI and power delivery components that need adequate airflow to cool. Intel’s
own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the
system integrator that chooses not to use Intel ® developed server building blocks to consult
vendor datasheets and operating parameters to determine the amount of airflow required for
their specific application and environmental conditions. Intel Corporation cannot be held
responsible if components fail or the server board does not operate correctly when used outside
any of its published operating or non-operating limits.
Intel Confidential Revision 0.8
Intel order number G26942-003