Technical Product Specification for Canoe Pass - Preminary - Intel
Technical Product Specification for Canoe Pass - Preminary - Intel Technical Product Specification for Canoe Pass - Preminary - Intel
Intel ® Server Board S2600CP and Intel ® Server System P4000CP Platform Management Intel ® Server Board S2600CP and Server System P4000CP TPS 5. Intel ® Server Board S2600CP and Intel ® Server System P4000CP Platform Management (Preliminary, subject to change) The platform management subsystem is based on the Integrated BMC features of the ServerEngines* Pilot III. The onboard platform management subsystem consists of communication buses, sensors, and the system BIOS, and server management firmware. 5.1 Feature Support 5.1.1 IPMI 2.0 Features The BMC supports the following non-IPMI features. See also the Intelligent Platform Management Interface Specification Second Generation v2.0. Baseboard management controller (BMC). IPMI Watchdog timer Messaging support, including command bridging and user/session support Chassis device functionality, including power/reset control and BIOS boot flags support Event receiver device: The BMC receives and processes events from other platform subsystems. Field replaceable unit (FRU) inventory device functionality: The BMC supports access to system FRU devices using IPMI FRU commands. System event log (SEL) device functionality: The BMC supports and provides access to a SEL. Sensor device record (SDR) repository device functionality: The BMC supports storage and access of system SDRs. Sensor device and sensor scanning/monitoring: The BMC provides IPMI management of sensors. It polls sensors to monitor and report system health. IPMI interfaces o Host interfaces include system management software (SMS) with receive message queue support, and server management mode (SMM) o IPMB interface o LAN interface that supports the IPMI-over-LAN protocol (RMCP, RMCP+) Serial-over-LAN (SOL) ACPI state synchronization: The BMC tracks ACPI state changes that are provided by the BIOS. BMC self test: The BMC performs initialization and run-time self-tests and makes results available to external entities. 5.1.2 Non-IPMI Features The BMC supports the following non-IPMI features. This list does not preclude support for future enhancements or additions. In-circuit BMC firmware update 50 Intel Confidential Revision 0.8 Intel order number G26942-003
Intel ® Server Board S2600CP and Server System P4000CP TPS Intel ® Server Board S2600CP and Intel ® Server System P4000CP Platform Management Fault resilient booting (FRB): FRB2 is supported by the watchdog timer functionality. Chassis intrusion detection (dependant on platform support) Basic fan control using TControl version 2 SDRs Fan redundancy monitoring and support Power supply redundancy monitoring and support Hot-swap fan support Acoustic management: Support for multiple fan profiles Signal testing support: The BMC provides test commands for setting and getting platform signal states. The BMC generates diagnostic beep codes for fault conditions. System GUID storage and retrieval Front panel management: The BMC controls the system status LED and chassis ID LED. It supports secure lockout of certain front panel functionality and monitors button presses. The chassis ID LED is turned on using a front panel button or a command. Power state retention Power fault analysis Intel ® Light-Guided Diagnostics Power unit management: Support for power unit sensor. The BMC handles power-good dropout conditions. DIMM temperature monitoring: New sensors and improved acoustic management using closed-loop fan control algorithm taking into account DIMM temperature readings. Address Resolution Protocol (ARP): The BMC sends and responds to ARPs (supported on embedded NICs). Dynamic Host Configuration Protocol (DHCP): The BMC performs DHCP (supported on embedded NICs). Platform environment control interface (PECI) thermal management support E-mail alerting Embedded web server Integrated KVM. Integrated Remote Media Redirection Local Directory Access Protocol (LDAP) support Intel ® Intelligent Power Node Manager support 5.1.3 New Manageability Features The Intel Server Board S2600CO also offer a number of new features: Sensor and SEL logging additions/enhancements (e.g. additional thermal monitoring capability, better isolation of faults to the FRU level) Embedded platform debug feature which allows capture of detailed data for later analysis by Intel engineering. Provisioning and inventory enhancements: o Signed Firmware (improved security) Revision 0.8 Intel Confidential Intel order number G26942-003 51
- Page 15 and 16: Intel ® Server Board S2600CP and S
- Page 17 and 18: Intel ® Server Board S2600CP and S
- Page 19 and 20: Intel ® Server Board S2600CP and S
- Page 21 and 22: Intel ® Server Board S2600CP and S
- Page 23 and 24: Intel ® Server Board S2600CP and S
- Page 25 and 26: Intel ® Server Board S2600CP and S
- Page 27 and 28: Intel ® Server Board S2600CP and S
- Page 29 and 30: Intel ® Server Board S2600CP and S
- Page 31 and 32: Intel ® Server Board S2600CP and S
- Page 33 and 34: Intel ® Server Board S2600CP and S
- Page 35 and 36: Intel ® Server Board S2600CP and S
- Page 37 and 38: Intel ® Server Board S2600CP and S
- Page 39 and 40: Intel ® Server Board S2600CP and S
- Page 41 and 42: Intel ® Server Board S2600CP and S
- Page 43 and 44: Intel ® Server Board S2600CP and S
- Page 45 and 46: Intel ® Server Board S2600CP and S
- Page 47 and 48: Intel ® Server Board S2600CP and S
- Page 49 and 50: Intel ® Server Board S2600CP and S
- Page 51 and 52: Intel ® Server Board S2600CP and S
- Page 53 and 54: Intel ® Server Board S2600CP and S
- Page 55 and 56: Intel ® Server Board S2600CP and S
- Page 57 and 58: Intel ® Server Board S2600CP and S
- Page 59 and 60: Intel ® Server Board S2600CP and S
- Page 61 and 62: Intel ® Server Board S2600CP and S
- Page 63 and 64: Intel ® Server Board S2600CP and S
- Page 65: Intel ® Server Board S2600CP and S
- Page 69 and 70: Intel ® Server Board S2600CP and S
- Page 71 and 72: Intel ® Server Board S2600CP and S
- Page 73 and 74: Intel ® Server Board S2600CP and S
- Page 75 and 76: Intel ® Server Board S2600CP and S
- Page 77 and 78: Intel ® Server Board S2600CP and S
- Page 79 and 80: Intel ® Server Board S2600CP and S
- Page 81 and 82: Intel ® Server Board S2600CP and S
- Page 83 and 84: Intel ® Server Board S2600CP and S
- Page 85 and 86: Intel ® Server Board S2600CP and S
- Page 87 and 88: Intel ® Server Board S2600CP and S
- Page 89 and 90: Intel ® Server Board S2600CP and S
- Page 91 and 92: Intel ® Server Board S2600CP and S
- Page 93 and 94: Intel ® Server Board S2600CP and S
- Page 95 and 96: Intel ® Server Board S2600CP and S
- Page 97 and 98: Intel ® Server Board S2600CP and S
- Page 99 and 100: Intel ® Server Board S2600CP and S
- Page 101 and 102: Intel ® Server Board S2600CP and S
- Page 103 and 104: Intel ® Server Board S2600CP and S
- Page 105 and 106: Intel ® Server Board S2600CP and S
- Page 107 and 108: Intel ® Server Board S2600CP and S
- Page 109 and 110: Intel ® Server Board S2600CP and S
- Page 111 and 112: Intel ® Server Board S2600CP and S
- Page 113 and 114: Intel ® Server Board S2600CP and S
- Page 115 and 116: Intel ® Server Board S2600CP and S
<strong>Intel</strong> ® Server Board S2600CP and <strong>Intel</strong> ® Server System P4000CP Plat<strong>for</strong>m Management<br />
<strong>Intel</strong> ® Server Board S2600CP and Server System P4000CP TPS<br />
5. <strong>Intel</strong> ® Server Board S2600CP and <strong>Intel</strong> ® Server<br />
System P4000CP Plat<strong>for</strong>m Management (Preliminary,<br />
subject to change)<br />
The plat<strong>for</strong>m management subsystem is based on the Integrated BMC features of the<br />
ServerEngines* Pilot III. The onboard plat<strong>for</strong>m management subsystem consists of<br />
communication buses, sensors, and the system BIOS, and server management firmware.<br />
5.1 Feature Support<br />
5.1.1 IPMI 2.0 Features<br />
The BMC supports the following non-IPMI features. See also the <strong>Intel</strong>ligent Plat<strong>for</strong>m<br />
Management Interface <strong>Specification</strong> Second Generation v2.0.<br />
Baseboard management controller (BMC).<br />
IPMI Watchdog timer<br />
Messaging support, including command bridging and user/session support<br />
Chassis device functionality, including power/reset control and BIOS boot flags support<br />
Event receiver device: The BMC receives and processes events from other plat<strong>for</strong>m<br />
subsystems.<br />
Field replaceable unit (FRU) inventory device functionality: The BMC supports access to<br />
system FRU devices using IPMI FRU commands.<br />
System event log (SEL) device functionality: The BMC supports and provides access to<br />
a SEL.<br />
Sensor device record (SDR) repository device functionality: The BMC supports storage<br />
and access of system SDRs.<br />
Sensor device and sensor scanning/monitoring: The BMC provides IPMI management of<br />
sensors. It polls sensors to monitor and report system health.<br />
IPMI interfaces<br />
o Host interfaces include system management software (SMS) with receive<br />
message queue support, and server management mode (SMM)<br />
o IPMB interface<br />
o LAN interface that supports the IPMI-over-LAN protocol (RMCP, RMCP+)<br />
Serial-over-LAN (SOL)<br />
ACPI state synchronization: The BMC tracks ACPI state changes that are provided by<br />
the BIOS.<br />
BMC self test: The BMC per<strong>for</strong>ms initialization and run-time self-tests and makes results<br />
available to external entities.<br />
5.1.2 Non-IPMI Features<br />
The BMC supports the following non-IPMI features. This list does not preclude support <strong>for</strong> future<br />
enhancements or additions.<br />
In-circuit BMC firmware update<br />
50<br />
<strong>Intel</strong> Confidential Revision 0.8<br />
<strong>Intel</strong> order number G26942-003
Change language