Technical Product Specification for Canoe Pass - Preminary - Intel
Technical Product Specification for Canoe Pass - Preminary - Intel
Technical Product Specification for Canoe Pass - Preminary - Intel
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Intel</strong> ® Server Board S2600CP and Server System P4000CP TPS <strong>Intel</strong> ® Server System P4000CP Power System Options<br />
3 x 2.5" 8xHDD<br />
BP<br />
2 x 3.5" 4xHDD<br />
BP<br />
1 x 3.5" 8xHDD<br />
BP<br />
P8 P9 P10 P11 P5 P6 P7<br />
1x4 1x4 1x4 1x4 1x5 1x5 1x4<br />
18<br />
HDD1<br />
8 x 2.5<br />
HDD1<br />
4x3.5<br />
HDD2<br />
8 x 2.5 na na na na<br />
HDD1<br />
4x3.5 peripheral bay<br />
HDD1<br />
8x3.5 na na peripheral bay<br />
8 x 3.5" fixed<br />
SATA<br />
8 x 3.5" fixed<br />
2xfixed 2xfixed 2xfixed 2xfixed peripheral bay<br />
SAS 2xfixed 2xfixed 2xfixed 2xfixed peripheral bay<br />
Revision 0.8 <strong>Intel</strong> Confidential<br />
<strong>Intel</strong> order number G26942-003<br />
HDD3<br />
8 x 2.5<br />
13.4.2.7 DC/DC Converters Loading<br />
The following table defines power and current ratings of three DC/DC converters located on the<br />
PDB, each powered from +12V rail. The three converters meet both static and dynamic voltage<br />
regulation requirements <strong>for</strong> the minimum and maximum loading conditions.<br />
Table 112. DC/DC Converters Load Ratings<br />
+3.3V Converter<br />
+12VDC Input DC/DC<br />
Converters<br />
+5V Converter -12V Converter<br />
MAX Load 15A 15A 0.5A<br />
MIN Static/Dynamic Load 0A 0A 0A<br />
Max Output Power 3.3V x15A =49.5W 5V x15A =75W 12V x0.5A =6W<br />
13.4.2.8 5VSB Loading<br />
There is also one DC/DC converter that converts the 12V standby into 5V standby.<br />
Table 113. 5VSB Loading<br />
MAX Load 5A<br />
MIN Static/Dynamic Load 0.1<br />
Max Output Power 5V x5A =25W<br />
12V stby/5V stby<br />
DC/DC Converters<br />
13.4.2.9 DC/DC Converters Voltage Regulation<br />
The DC/DC converters’ output voltages stay within the following voltage limits when operating at<br />
steady state and dynamic loading conditions. These limits include the peak-peak ripple/noise<br />
specified in Table 118. The 3.3V and 5V outputs are measured at the remote sense point, all<br />
other voltages measured at the output harness connectors.<br />
Table 114. Voltage Regulation Limits<br />
135
Change language