Technical Product Specification for Canoe Pass - Preminary - Intel

More documents

Recommendations

Info

Intel ® Server System P4000CP Front Control Panel and Back Panel Intel ® Server Board S2600CP and Server System P4000CP TPS ID Button with integrated ID LED – Toggles the integrated ID LED and the Blue server board ID LED on and off. The ID LED is used to identify the system for maintenance when installed in a rack of similar server systems. The ID LED can also be toggled on and off remotely using the IPMI “Chassis Identify” command which will cause the LED to blink for 15 seconds. NMI Button – When the NMI button is pressed, it puts the server in a halt state and issues a non-maskable interrupt (NMI). This can be useful when performing diagnostics for a given issue where a memory download is necessary to help determine the cause of the problem. To prevent an inadvertent system halt, the actual NMI button is located behind the Front Control Panel faceplate where it is only accessible with the use of a small tipped tool like a pin or paper clip. Network Activity LEDs (NIC LED) – The Front Control Panel includes an activity LED indicator for each on-board Network Interface Controller (NIC). When a network link is detected, the LED will turn on solid. The LED will blink once network activity occurs at a rate that is consistent with the amount of network activity that is occurring. System Reset Button – When pressed, this button will reboot and re-initialize the system. System Status LED – The System Status LED is a bi-color (Green/Amber) indicator that shows the current health of the server system. The system provides two locations for this feature; one is located on the Front Control Panel, the other is located on the back edge of the server board, viewable from the back of the system. Both LEDs are tied together and will show the same state. The System Status LED states are driven by the on-board platform management subsystem. System Power Button with power LED – Toggles the system power on and off. This button also functions as a sleep button if enabled by an ACPI compliant operating system. Pressing this button will send a signal to the iBMC, which will either power on or power off the system. The integrated LED is a single color (Green) and is capable of supporting different indicator states as defined in the following table. 88 Table 47. Power/Sleep LED Functional States State Power Mode LED Description Power-off Non-ACPI Off System power is off, and the BIOS has not initialized the chipset. Power-on Non-ACPI On System power is on S5 ACPI Off Mechanical is off, and the operating system has not saved any context to the hard disk. S4 ACPI Off Mechanical is off. The operating system has saved context to the hard disk. S3-S1 ACPI Slow blink 1 DC power is still on. The operating system has saved context and gone into a level of low-power state. S0 ACPI Steady on System and the operating system are up and running. HDD Activity LED - The drive activity LED on the front panel indicates drive activity from the on-board hard disk controllers. The server board also provides a header giving access to this LED for add-in controllers. USB Ports – In addition, the front panel provides two USB ports. The USB ports are cabled to the 2x5 connector on the server board. Intel Confidential Revision 0.8 Intel order number G26942-003
Intel ® Server Board S2600CP and Server System P4000CP TPS Intel ® Server System P4000CP Front Control Panel and Back Panel 10.1.2 Front Control Panel LED Status The following table provides a description of each LED status. LED Color Condition What It Means Green On Power on or S0 sleep. Power/Sleep Status Global HDD Activity LAN 1-4 Activity/Link Chassis Identification Green Blink S1 sleep or S3 standby only for workstation baseboards. Off Off (also sleep S4/S5 modes). Green On System ready/No alarm. Green Blink Amber On Amber Blink Revision 0.8 Intel Confidential Intel order number G26942-003 Off Green Blink HDD access. System ready, but degraded: redundancy lost such as PS or fan failure; non-critical temp/voltage threshold; battery failure; or predictive PS failure. Critical alarm: Voltage, thermal, or power fault; CPU missing; insufficient power unit redundancy resource offset asserted. Non-Critical failure: Critical temp/voltage threshold; VDR hot asserted; min number fans not present or failed. AC power off: System unplugged. AC power on: System powered off and in standby, no prior degraded\non-critical\critical state. Off No access and no fault. Green On LAN link Green Blink LAN access. Off Idle. Blue On Front panel chassis ID button pressed. Blue Blink Unit selected for identification via software. Off No identification. 89
Page 1 and 2:
Intel ® Server Board S2600CP Intel
Page 3 and 4:
Intel ® Server Board S2600CP and S
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54: Intel ® Server Board S2600CP and S
Page 103: Intel ® Server Board S2600CP and S
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Intel® Server System P4000CP TPS D
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Intel® Server System P4000CP TPS A
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Error! No text of specified style i
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
® Intel ® Server Board S2600CP an
Page 219 and 220:
® Intel ® Server Board S2600CP an
show all

Technical Product Specification for Canoe Pass - Preminary - Intel

Create successful ePaper yourself

Delete template?

Save as template?