the effect of the particle size distribution on non-newtonian turbulent ...

References Page R.5
METZNER A B (1956), Non-Newtonian Technology: Fluid Mechanics, Mixing, and Heat
Transfer, Advances in Chemical Engineering, Vo1 1, 77-153, Academic Press Inc, New
York.
METZNER A B and REED J C (1955), Flow <strong>of</strong> non-Newtonian fluids - correlation <strong>of</strong> <strong>the</strong>
laminar, transition and turbulent flow regions, AIChE Journal, v.1 nA.
MICHIYOSm 1, MATSUMOTO R, MIZUNO K and NAKAI M (1966), Flow <strong>of</strong> slurry
through a circular tube. Friction factor for tubes. Part II., Int Chem Eng, 6,2.
MILLER R W (1989), Flow Engineering Handbook - Second Edition, McGraw-Hill
Publishing Company, New York.
MOODIE L, G S THORVALDSEN, PT SLATTER and F W PETERSEN, The Balanced
Beam Tube Viscometer, Hydraulic Conveying Association <strong>of</strong>SA Conference, 14 November,
1994.
MOODY L F (1944), Friction factors for pipe flow, Trans ASME, November, 1944.
MOONEY M (1931), Explicit Formulas for Slip and Fluidity, J. Rheology, 2, 210-222.
MUN R (1988), Turbulent pipe flow <strong>of</strong> yield stress fluids, M Eng Sci Thesis, University <strong>of</strong>
Melbourne.
NEILL RIG (1988), The rheology and flow behaviour <strong>of</strong> high concentration mineral
slurries, Msc Dissertation, University <strong>of</strong> Cape Town.
NlKURADSE J (1932), Gesetzmassigkeiten der turbulenten Stromung in glatten Rohren,
Forschungsheft No. 356, VDI Verlag, Berlin, 32.