show voice port - Tecnológico de Costa Rica
show voice port - Tecnológico de Costa Rica show voice port - Tecnológico de Costa Rica
13 - 8 Aironet 340 Series Bridge When you select the FTP option, the Diagnostics Load FTP Menu appears: Diagnostics Load Ftp Menu Option Value Description 1 - Get - Load a firmware/config file 2 - Put - Send a firmware file 3 - Config - Send a configuration file 4 - Dest [ 000.000.000.000 ] - Host IP address 5 - Username [ "" ] - Host username 6 - Password - Host password 7 - Filename [ "" ] - Host filename Enter an option number or name, "=" main menu, previous menu > Downloading a New Firmware/Configuration File (Get) Use the get option to download (retrieve) firmware or a configuration file. Once the file has been loaded, the unit will check the first characters of the file. If “! CONFIGURATION” is present, the file contains menu configuration commands. Otherwise the file is considered to be firmware and will be loaded in the flash memory and then executed. ÍTo Download Firmware using FTP: 1. Load the file onto the PC, host, or bridge you will retrieve from. 2. Select the dest option and type in the IP address of the host PC or Aironet 340 Series Bridge. 3. Select the username option and type in the username required to access the firmware file. If downloading from another Aironet 340 Series Bridge, the username option must have a value even though the value is not used by the remote Aironet 340 Series Bridge. 4. Select the password option and type the password associated with the username. If downloading from another Aironet 340 Series Bridge, the login password value must match the console write privilege password on the remote Aironet 340 Series Bridge.
Performing Diagnostics 13 - 9 5. Select the filename option and type the name of the firmware file you are retrieving (including drive and directory), then press ENTER. If downloading from another Aironet 340 Series Bridge, the filename option must have a value even though the value is not used by the remote Aironet 340 Series Bridge. 6. Select the get option. The unit will begin an FTP session to the host PC, retrieve the file, program the flash memory, and reboot. A message will appear: 220 sun_host FTP server (SunOS 4.1) ready. 230 User sysop logged in. 200 Type set to I. 200 PORT command successful. 150 Binary data connection for apv33.img (163056 bytes). 226 Binary Transfer complete. 221 Goodbye. FTP: received 161056 bytes in 00:00:10; 15 Kbytes/s transfer rate rebooting unit. Uploading a New Firmware Version (Put) Use the put option to upload (send) a copy of the currently running firmware to another system. If the system is a: n PC or host: A copy of the firmware will be stored on the system’s disk, possibly for downloading to other units later. n Aironet 340 Series Bridge: The remote Aironet 340 Series Bridge will flash the new code and begin running it immediately. You can use one Aironet 340 Series Bridge to upgrade another Aironet 340 Series Bridge. Í To Upload Firmware using FTP: 1. Select the dest option and type the IP address of the remote PC, host or Aironet 340 Series Bridge you are sending to. Press ENTER. 2. Select the username option and type the username for the remote PC, host, or Aironet 340 Series Bridge you are sending to. Press ENTER. If uploading to another Aironet 340 Series Bridge, the username option must have a value even though the value is not used by the
- Page 407 and 408: Displaying Overall Status (Status)
- Page 409 and 410: Viewing Statistics 9 - 9 2. Type th
- Page 411 and 412: Displaying Node Information (Node)
- Page 413 and 414: Chapter 10 - Setting Up the Associa
- Page 415 and 416: Using the Association Menu Setting
- Page 417 and 418: Setting Up the Association Table 10
- Page 419 and 420: Setting Up the Association Table 10
- Page 421 and 422: Chapter 11 - Using Filters CHAPTER
- Page 423 and 424: Using Filters 11 - 3 n Both: Packet
- Page 425 and 426: Filtering Node Addresses (Node) Usi
- Page 427 and 428: Displaying the IP to Network Addres
- Page 429 and 430: Setting the Default Action (Default
- Page 431 and 432: Í To Add a Filter Using the Monito
- Page 433 and 434: If you type llc: a. When you select
- Page 435 and 436: Using Filters 11 - 15 The contents
- Page 437 and 438: Chapter 12 - Setting Up Event Logs
- Page 439 and 440: Setting Up Event Logs 12 - 3 Node
- Page 441 and 442: Error Logs Severe Error Logs “Cat
- Page 443 and 444: Lost our association, new specified
- Page 445 and 446: Setting Up Event Logs 12 - 9 NOTE:
- Page 447 and 448: Setting Statistic Parameters (Stati
- Page 449 and 450: The following trap messages will be
- Page 451 and 452: Chapter 13 - Performing Diagnostics
- Page 453 and 454: Performing Diagnostics 13 - 3 are d
- Page 455 and 456: Physically Locating a Unit (Find) P
- Page 457: Performing Diagnostics 13 - 7 4. Th
- Page 461 and 462: Performing Diagnostics 13 - 11 4. I
- Page 463 and 464: Performing Diagnostics 13 - 13 If t
- Page 465 and 466: Appendix A - Aironet 340 Series Bri
- Page 467 and 468: Console Port Pin-Out The Console Po
- Page 469 and 470: B-2 Aironet 340 Series Bridge Conti
- Page 471 and 472: B-4 Aironet 340 Series Bridge Broad
- Page 473 and 474: B-6 Aironet 340 Series Bridge Desti
- Page 475 and 476: C-2 Aironet 340 Series Bridge The I
- Page 477 and 478: C-4 Aironet 340 Series Bridge The I
- Page 479 and 480: C-6 Aironet 340 Series Bridge The U
- Page 481 and 482: C-8 Aironet 340 Series Bridge The S
- Page 483 and 484: C-10 Aironet 340 Series Bridge MIBI
- Page 485 and 486: C-12 Aironet 340 Series Bridge The
- Page 487 and 488: C-14 Aironet 340 Series Bridge The
- Page 489 and 490: C-16 Aironet 340 Series Bridge The
- Page 491 and 492: C-18 Aironet 340 Series Bridge The
- Page 493 and 494: Appendix E - Regulatory Information
- Page 495 and 496: Department of Communications—Cana
- Page 497 and 498: E-5
- Page 499 and 500: LATIN AMERICA AND CARIBBEAN GROUP G
- Page 501: LATIN AMERICA AND CARIBBEAN GROUP C
Performing Diagnostics 13 - 9<br />
5. Select the filename option and type the name of the firmware file<br />
you are retrieving (including drive and directory), then press<br />
ENTER.<br />
If downloading from another Aironet 340 Series Bridge, the filename<br />
option must have a value even though the value is not used by<br />
the remote Aironet 340 Series Bridge.<br />
6. Select the get option.<br />
The unit will begin an FTP session to the host PC, retrieve the file,<br />
program the flash memory, and reboot. A message will appear:<br />
220 sun_host FTP server (SunOS 4.1) ready.<br />
230 User sysop logged in.<br />
200 Type set to I.<br />
200 PORT command successful.<br />
150 Binary data connection for apv33.img (163056 bytes).<br />
226 Binary Transfer complete.<br />
221 Goodbye.<br />
FTP: received 161056 bytes in 00:00:10; 15 Kbytes/s transfer rate<br />
rebooting unit.<br />
Uploading a New Firmware Version (Put)<br />
Use the put option to upload (send) a copy of the currently running firmware<br />
to another system. If the system is a:<br />
n PC or host: A copy of the firmware will be stored on the system’s<br />
disk, possibly for downloading to other units later.<br />
n Aironet 340 Series Bridge: The remote Aironet 340 Series Bridge<br />
will flash the new co<strong>de</strong> and begin running it immediately. You can<br />
use one Aironet 340 Series Bridge to upgra<strong>de</strong> another Aironet 340<br />
Series Bridge.<br />
Í To Upload Firmware using FTP:<br />
1. Select the <strong>de</strong>st option and type the IP address of the remote PC, host<br />
or Aironet 340 Series Bridge you are sending to. Press ENTER.<br />
2. Select the username option and type the username for the remote<br />
PC, host, or Aironet 340 Series Bridge you are sending to. Press<br />
ENTER.<br />
If uploading to another Aironet 340 Series Bridge, the username<br />
option must have a value even though the value is not used by the