show voice port - Tecnológico de Costa Rica

The following trap messages will be sent as they occur:
Setting Up Event Logs 12 - 13
n A cold start trap will be sent when the unit first powers up.
n A link up trap is sent when the configuration is changed or restored
for a severe error condition.
n A link down trap is sent when the configuration is changed or
encounters a severe error condition.
n A link up trap is sent for an Aironet 340 Series Bridge as soon as the
radio is configured.
n An authentication failure trap will be sent if an SNMP request is
received with an unknown community name. This trap may be disabled
by setting the “authtrap” parameter to “Off”. See “The generated
trap will contain the text of the log message along with the
severity of the log. See the MIB definition files for the exact layout
Enabling Authentication Failure Trap (Authtrap)”.
n Any normal alarms and logs you have configured to be sent by setting
the “loglevel” parameter.
NOTE: Since the path to the trap destination may be through a failed or
not yet established radio link, it is possible that cold start and link down
traps could be lost.
Use the trapcomm option to specify the community name that will be
used in the trap message.
The LogLevel option configures The Aironet 340 Series Bridge to generate
enterprise specific traps whenever a log of a given severity or
higher is produced. The trapdest parameter must be “On”.
The generated trap will contain the text of the log message along with
the severity of the log. See the MIB definition files for the exact layout
Enabling Authentication Failure Trap (Authtrap)
Use the authtrap option to control the generation of SNMP authentication
failure traps.