show voice port - Tecnológico de Costa Rica

Using Filters 11 - 3
n Both: Packets in both directions will be filtered. This option allows
control of the type of traffic the radio nodes may use.
Filtering Multicast Addresses (Multicast)
The multicast menu allows you to control the filtering of multicasts
based on the actual multicast address. When you select the Multicast
option the Filter Multicast Menu appears.
Filter Multicast Menu
Option Value Description
1 - Default [ forward ]- Default multicast action
2 - Show - Display the multicast filters
3 - Add - Add a multicast address filter
4 - Remove - Remove a multicast address filter
5 - Radio_mcst[ everywhere ]- Where to forward multicasts from radio
Enter an option number or name, “=” main menu, previous menu
>_
Setting the Default Action (Default)
The default option controls the filtering of multicasts whose address is
not in the table. You may pick one of the following actions:
n Discard: Multicasts with no table entries will not be forwarded out
the radio network.
n Forward: Multicasts with no table entries will be forwarded out the
radio network.
n Accesspt: Multicasts with no table entry will only be forwarded to
other access points and bridges, not to the client nodes.
n Nonpsp: Multicasts with no table entries will be forwarded out the
radio network to non-power saving end nodes, not to any nodes
using the PSP.
Displaying The Filters (Show)
Use the show option to display the multicast filters. When you select the
show option the Multicast Filters screen appears.