show voice port - Tecnológico de Costa Rica

Setting Up the Association Table 10 - 7
For example, suppose there is a bridge on your accounting LAN and
three end nodes (A, B, and C) within radio range of the bridge. Only End
Node A should be allowed access to the LAN.
1. Disable auto-association.
2. Add End Node A as a static entry. End Node A is allowed to associate
to the root unit.
3. End Nodes B and C are not allowed to associate.
Figure 10.1 - Example of Using Static Entry to Restrict Association
Root Unit
End Node A
Wired LAN
End Node B
End Node C
As another example, suppose you only wanted to block End Node C and
did not care about any other nodes. In this case you would leave autoassociation
“On” and add a static entry for End Node C to block it.