show voice port - Tecnológico de Costa Rica

Displaying Node Information (Node)
Viewing Statistics 9 - 11
The node command displays current Ethernet information about the
client.
Radio Node Statistics
ID Address Signal Tx Pkt Tx Byte Tx Retry Rx Pkt Rx Byte Rate
--- ------- ------ ----- ------- -------- ------ ------- -----
004096128e76 45 1012 204322 39 1673 112386
Enter space to redisplay, q[uit]:
n Address: Displays the address of the client.
n Signal: Displays the signal strength of the client.
n Tx Pkt: Displays the number of packets transmitted from the client.
n Tx Byte: Displays the actual number of bytes transmitted from the
client.
n Tx Retry: Displays the number of transmitted packets that were
resent by the client.
n Rx Pkt: Displays the number of packets the client has received.
n Rx Byte: Displays the actual number of bytes received by the client.
Displaying ARP Information (ARP)
The ARP command displays the ARP table of IP address to MAC
address. It also displays whether the node supports Ethernet Type II or
IEEE 802.2 framing. The last column displays the time until the entry
times out.
INTERNET ADDRESS TABLE
Internet Address Network Address ETHII 802.2 Time
---------------- --------------- ----- ------ ----------
149.023.165.175 0000c0d9657f Yes 0:14:57
149.023.165.040 0800099e0b1a Yes 0:14:57
Enter space to redisplay, q[uit] :