show voice port - Tecnológico de Costa Rica

Setting Network Identifiers 6 - 5
The Flags column displays letters identifying the type of entry:
n S: Entry is static (entered by operator)
n N: Entry is an remote network route
n H: Entry is a host route
The Use column indicates the number of packets that have been forwarded
using this table entry.
Setting up the Time Base (Configuration Time)
This menu lets you configure the bridge to query a network time server
such that any logs its printed can reference the current date and time.
Configuration Time Menu
Option Value Description
1 - Time_server [ 149.023.165.080 ] - Time protocol server
2 - Sntp_server [ 000.000.000.000 ] - Network time server
3 - Offset [ -300 ] - GMT offset in minutes
4 - Dst [ on ] - Use daylight savings time
>_
Enter an option number or name, “=” main menu, previous menu
The time_server option sets the IP address or name of a unix time protocol
server to be queried. The sntp_server option sets the IP address or
name of an internet simple network time protocol server to be queried.
You should configure only one type of server.
Since the time returned by the servers is based on Greenwich mean time
you must use the Offset option to give the time difference in minutes
(plus or minus) from GMT.
The Dst option selects whether your time zone uses daylight savings
time.