02.07.2013 Views

show voice port - Tecnológico de Costa Rica

show voice port - Tecnológico de Costa Rica

show voice port - Tecnológico de Costa Rica

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

4 - 18 Aironet 340 Series Bridge<br />

radio cell, usually because of knowledge of traffic patterns, you can use<br />

the parent_id option to select the MAC address of the parent the unit<br />

would always try and associate to.<br />

If you set the parent_timeout option to off the unit will only associate<br />

with the specified parent. If you set a value, the unit will poll for the<br />

specified parent for the given number of seconds each time it needs to<br />

associate. If the parent is not found it will choose the best available parent.<br />

If the unit ever sees that the specified parent is present it will switch<br />

its association.<br />

Setting Retry Transmission Time (Time_Retries, Count_Retries)<br />

These settings allow the user to establish a particular level of radio performance<br />

by controlling the RF packet retry level. The lesser of the two<br />

values will be used. If the retry count is reached before the retry time is<br />

met, then retry process on this particular packet is stopped. If the <strong>de</strong>stination<br />

was a child no<strong>de</strong>, it will be disassociated. If the <strong>de</strong>stination was a<br />

parent bridge, the unit will begin scanning for a new parent.<br />

The retry time may be set in the range of 1 to 30 seconds. The Aironet<br />

340 Series Bridge will continually retry the packet in this time period<br />

while contending for the air waves with other transmitting no<strong>de</strong>s.<br />

The retry count may be set in the range of 0 to 64 times. If the count is<br />

set to zero, only the retry time applies.<br />

Use the retry count field if the Aironet 340 Series Bridge is mobile and<br />

you want to move from bridge to bridge very quickly after moving out of<br />

range. In non-mobile applications, since you can’t move out of range, it<br />

is most likely there is some temporary interference. Retry at a later time.<br />

Setting the Association Refresh Interval (Refresh)<br />

This setting is only present on repeater bridges. If there has been no<br />

directed traffic between the unit and its parent for the specified time (in<br />

tenths of a second) the unit will send an empty packet to the parent to<br />

verify that the connection is still alive.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!