show voice port - Tecnológico de Costa Rica

2 - 12 Aironet 340 Series Bridge
i
Keep in mind the following when setting Privilege Levels and Passwords:
n Only Read-Only and Read-Write privilege levels can be password
protected.
n You can always go from a higher privilege level to a lower privilege
level without a password. If you try to go to a higher privilege level,
you will be required to enter the password.
n Passwords are upper/lower case sensitive.
When Entering the passwords you will be prompted twice to ensure they
were entered correctly. The prompting will be done with echoing off.
To change the current privilege level go to the main menu and use the
“privilege” function. You will be prompted for the privilege level and its
associated password.
NOTE: After a privilege level has been assigned, anyone attempting to
access that level will be prompted for the password. This allows you to
set various privilege levels for individuals, providing them with access to
some options, while denying them access to others. Remember passwords
are case sensitive.
CAUTION: Make sure you write down the passwords you have established
and keep them in a safe place. If you forget your password, the unit
will have to be returned for factory servicing. Please contact Cisco Technical
Support for further instructions.
Controlling Telnet and Web Access to the Console
You may disallow telnet and/or web access to the unit with the “telnet”
and “http” menu items. Setting the value to “off” completely disables
this type of access.