show voice port - Tecnológico de Costa Rica

Installing the Console Port Cable
Installing the Aironet 340 Series Bridge 1 - 5
1. Attach the Console Port cable to the Serial Port. Attach the other
cable end to the Serial Port on a terminal or a PC running a terminal
emulation program. Use a 9-pin male to 9-pin female straight
through cable (Figure 1.3).
NOTE: This connection is required for setting up initial configuration information.
After configuration is completed, this cable may be removed until
additional configuration is required via the Serial Port.
Figure 1.3 - Console Port Connection
2. Set the terminal to 9600 Baud, No-Parity, 8 data bits, 1 Stop bit, and
ANSI compatible.