show voice port - Tecnológico de Costa Rica

timing pulse
timing pulse
To specify the pulse dialing rate for a specified voice port, use the timing pulse voice-port
configuration command. Use the no form of this command to reset the default value.
timing pulse pulses-per-second
no timing pulse pulses-per-second
4-78
Syntax Description
pulses-per-second Pulse dialing rate, in pulses per second. Valid entries are numbers from
10 to 20. Supported on FXO and E&M ports only.
Default
20
Command Mode
Voice-port configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3(1)T.
The call signal direction for the timing pulse command is out.
Examples
The following example configures the pulse dialing rate on a Cisco 3600 series voice port to
15 pulses per second:
voice-port 1/0/0
timing pulse 15
Related Commands
You can use the master indexes or search online to find documentation of related commands.
timeouts initial
timeouts interdigit
timing clear-wait
timing delay-duration
timing delay-start
timing dial-pulse min-delay
timing digit
timing interdigit
timing pulse-interdigit
timing wink-duration
timing wink-wait
Voice over IP for the Cisco 3600 Series Software Configuration Guide