show voice port - Tecnológico de Costa Rica

timing delay-start
timing delay-start
4-74
To specify the minimum delay time from outgoing seizure to out-dial address for a specified voice
port, use the timing delay-start voice-port configuration command. Use the no form of this
command to reset the default value.
timing delay-start milliseconds
no timing delay-start milliseconds
Syntax Description
milliseconds Minimum delay time, in milliseconds, from outgoing seizure to out-dial
address. Valid entries are numbers from 20 to 2000. Supported on E&M
ports only.
Default
300 milliseconds
Command Mode
Voice-port configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3(1)T.
The call direction for the timing delay-start command is out.
Examples
The following example configures the delay-start duration on a Cisco 3600 series voice port to
250 milliseconds:
voice-port 1/0/0
timing delay-start 250
Related Commands
You can use the master indexes or search online to find documentation of related commands.
timeouts initial
timeouts interdigit
timing clear-wait
timing delay-duration
timing dial-pulse min-delay
timing digit
timing interdigit
timing pulse
timing pulse-interdigit
timing wink-duration
timing wink-wait
Voice over IP for the Cisco 3600 Series Software Configuration Guide