show voice port - Tecnológico de Costa Rica

snmp enable peer-trap poor-qov
snmp enable peer-trap poor-qov
To generate poor quality of voice notification for applicable calls associated with VoIP dial peers,
use the snmp enable peer-trap poor-qov dial-peer configuration command. Use the no form of this
command to disable this feature.
snmp enable peer-trap poor-qov
no snmp enable peer-trap poor-qov
Syntax Description
This command has no arguments or keywords.
Default
Disabled
Command Mode
Dial-peer configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3(1)T.
Use the snmp enable peer-trap poor qov command to generate poor quality of voice notifications
for applicable calls associated with this dial peer. If you have an SNMP manager that will use SNMP
messages when voice quality drops, you might want to enable this command. Otherwise, you should
disable this command to reduce unnecessary network traffic.
This command is applicable only to VoIP peers.
Example
The following example enables poor quality of voice notifications for calls associated with VoIP dial
peer 10:
dial-peer voice 10 voip
snmp enable peer-trap poor-qov
Related Commands
You can use the master index or search online to find documentation of related commands.
snmp-server enable trap voice poor-qov
snmp trap link-status
Voice Over IP for the Cisco 3600 Series Commands 4-65