show voice port - Tecnológico de Costa Rica

show dialplan incall number
show dialplan incall number
4-54
To pair different voice ports and telephone numbers together for troubleshooting, use the show
dialplan incall number privileged EXEC command.
show dialplan incall slot-number/subunit-number/port number dial string
Syntax Description
slot-number/ Specifies the slot number in the Cisco router where the voice network
module is installed. Valid entries are from 0 to 3, depending on the voice
interface card you have installed.
subunit-number/ Specifies the subunit on the voice network module where the voice port
is located. Valid entries are 0 or 1.
port Specifies the voice port. Valid entries are 0 or 1.
dial string Specifies a particular destination pattern (telephone number).
Command Mode
Privileged EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3(1)T.
Occasionally, an incoming call cannot be matched to a dial peer in the dial-peer database. One reason
this might occur is that the specified destination cannot be reached via the voice interface through
which the incoming call came. Use the show dialplan incall number command as a troubleshooting
method to resolve the call destination by pairing voice ports and telephone numbers together until
there is a match.
Example
The following example tests whether the telephone extension 57681 can be reached through voice
port 1/0/1:
show dialplan incall 1/0/1 number 57681
Related Commands
You can use the master index or search online to find documentation of related commands.
show dialplan number
Voice over IP for the Cisco 3600 Series Software Configuration Guide