show voice port - Tecnológico de Costa Rica

show call active voice
show call active voice
4-44
To show the active call table, use the show call active voice privileged EXEC command.
show call active voice
Syntax Description
This command contains no arguments or keywords.
Command Mode
Privileged EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3(1)T.
Use the show call active voice privileged EXEC command to display the contents of the active call
table, which shows all of the calls currently connected through the router.
For each call, there are 2 call legs, usually a POTS call leg and a VoIP call leg. A call leg is a discrete
segment of a call connection that lies between 2 points in the connection. Each dial peer creates a
call leg, as shown in Figure 4-1.
Figure 4-1 Call Legs Example
Call leg for VoIP
dial peer 3
IP cloud
Dial peer 1 Dial peer 2
Dial peer 3
These 2 call legs are associated by the connection ID. The connection ID is global across the voice
network, so that you can associate 2 call legs on one router with 2 call legs on another router, thereby
providing an end-to-end view of a call.
Voice over IP for the Cisco 3600 Series Software Configuration Guide
Call leg for POTS
dial peer 4
Dial peer 4
Destination Source
S6690