show voice port - Tecnológico de Costa Rica

eq-qos
req-qos
4-38
To specify the desired quality of service to be used in reaching a specified dial peer, use the req-qos
dial-peer configuration command. Use the no form of this command to restore the default value for
this command.
req-qos {best-effort | controlled-load | guaranteed-delay}
no req-qos
Syntax Description
best-effort Indicates that Resource Reservation Protocol (RSVP) makes no
bandwidth reservation.
controlled-load Indicates that RSVP guarantees a single level of preferential service,
presumed to correlate to a delay boundary. The controlled load service
uses admission (or capacity) control to assure that preferential service is
received even when the bandwidth is overloaded.
guaranteed-delay Indicates that RSVP reserves bandwidth and guarantees a minimum bit
rate and preferential queuing if the bandwidth reserved is not exceeded.
Default
The default value for this command is best-effort. The no form of this command restores the default
value.
Command Mode
Dial-peer configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3(1)T.
Use the req-qos command to request a specific quality of service to be used in reaching a dial peer.
Like acc-qos, when you enter this command, the Cisco IOS software reserves a certain amount of
bandwidth so that the selected quality of service can be provided. Cisco IOS software uses Resource
Reservation Protocol (RSVP) to request quality of service guarantees from the network.
This command is applicable only to VoIP peers.
Example
The following example configures guaranteed-delay as the desired (requested) quality of service to
a dial peer:
dial-peer voice 10 voip
req-qos guaranteed-delay
Related Commands
You can use the master index or search online to find documentation of related commands.
acc-qos
Voice over IP for the Cisco 3600 Series Software Configuration Guide