show voice port - Tecnológico de Costa Rica

answer-address
To specify the full E.164 telephone number to be used to identify the dial peer of an incoming call,
use the answer-address dial-peer configuration command. Use the no form of this command to
disable this feature.
answer-address [+]string
no answer-address
Syntax Description
string Series of digits that specify the E.164 or private dialing plan telephone
number. Valid entries are:
• Digits 0 through 9, letters A through D, pound sign (#), and asterisk
(*), which represent specific digits that can be entered.
• Plus sign (+), which is optionally used as the first digit to indicate an
E.164 standard number.
• Comma (,), which inserts a pause between digits.
• Period (.), which matches any entered digit.
Default
The default value is enabled with a null string.
Command Mode
Dial-peer configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3(1)T.
Use the answer-address command to identify the origin (or dial peer) of incoming calls from the IP
network. Cisco IOS software identifies the dial peers of a call in one of two ways: either by
identifying the interface through which the call is received or through the telephone number
configured with the answer-address command. In the absence of a configured telephone number,
the peer associated with the interface will be associated with the incoming call.
For calls coming in from a POTS interface, the answer-address command is not used to select an
incoming dial peer. The incoming POTS dial peer is selected on the basis of the port configured for
that dial peer.
This command is applicable to both VoIP and POTS dial peers.
Note The Cisco IOS software does not check the validity of the E.164 telephone number; it will
accept any series of digits as a valid number.
answer-address
Voice Over IP for the Cisco 3600 Series Commands 4-7