show voice port - Tecnológico de Costa Rica

session target—a remote IP or DNS address specified as one end of a voice connection.
tag—a positive integer in the range 1 to 231 -1 (2147483647) used to identify a dial peer.
UDP—User Datagram Protocol.
VIC—voice interface card. VICs install in a slot in a voice network module, and provide the
connection to the telephone equipment or network. There are three types: FXS, FXO, and E&M
interface. Each VIC provides two ports of the same type.
voice network module—a network module that installs in a slot in a Cisco 3600 series router,
converts telephone voice signals into a form that can be transmitted over an IP network, and provides
one or two slots for voice interface cards.
VoIP—voice over IP, a feature that carries voice traffic, such as telephone calls and faxes, over an
IP network, simultaneously with data traffic.
VoIP dial peer—a software object that ties together an IP address and a telephone number at a
remote site reached over the IP network (also called remote dial peer).
List of Terms
Voice over IP Quick Start Guide 31