G-13.mft parallel - NRI

GLOSSARY G-13.mft totalizer
ECV Electronic CoinValidator
ECV totalizer Totalizer model that differs from the standard totalizer model
by a machine interface with different pin assignment. The G-
13.mft ECV totalizers are designed specifically for the
machines of the Italian market.
Memory block Memory of the coin validator. At the manufacturer’s company,
a customer-specific setting is programmed to determine
whether the 32 → coin channels of the G-13.mft are to be
data-managed in one memory block (single block datamanagement)
or, when divided into 16 channels each, in two
memory blocks (double block data-management). Two
(memory) blocks 0 and 1 can be used to data-manage two
independent configurations of coin channel data (e.g. two
currencies). However, for coin validator operation, only one
memory block with 16 channels can be active at a time; the
other block is inhibited.
The memory block(s) can be updated using WinEMP (→
data block update).
On-request mode For the timer and TV totalizer operation, the on-request mode
can be activated by the manufacturer or using the configuration
software. In that mode, the signals for starting, e.g., a game
are not transmitted immediately to the machine as soon as
the credit reaches the price but only after the customer has
pressed a start button.
Return line When the return lever/button on the coin validator is operated,
a return signal is transmitted to the return line. The coin
validator then releases all the coins and foreign bodies inside
the device.
Sorting control line To sort the cash coins with an external sorting device, the
coin validator has three sorting control lines. Alternatively the
→ return signal line can be used for sorting (not with the →
ECV totalizer).
Sorting gate The sorting gates are activated in the coin validator depending
on the run time of accepted coins and direct the coins to be
sorted into the return area or coin outlet towards the cash-box
or external sorting device.
Sorting time The sorting time specifies the switching times of an external
sorting device.
74 National Rejectors, Inc. GmbH, Buxtehude