G-13.mft parallel - NRI

G-13.mft totalizer GENERAL INFORMATION
1 General information
This chapter should provide a general overview of the advantages and
options regarding the G-13.mft totalizer. The first section, however, is
designed to help you navigate easily within these operating instructions.
General information about these instructions
Text conventions
These operating instructions describe the design and operation of the
electronic coin validator G-13.mft with a parallel interface in the 1-/2-price
totalizer, timer and TV totalizer mode. Chapters 4 und 5 explain the necessary
steps for starting up and operating the coin validator. Chapter 6 explains how
to clean the coin validator and remedy the cause of a malfunction.
Chap. 8 "Technical data" and the appended index and glossary reduce the
search for specific explanations.
To make it easier for you to navigate within these instructions and to operate
the device, the following accentuations were made in the text:
National Rejectors, Inc. GmbH, Buxtehude
Safety instructions, which you must observe in order to protect
operators and equipment.
Special notes, which are to facilitate the use of the coin validator.
1 2 3 ... Requests to perform an action are numbered in another typeface.
At the beginning of a chapter you will find a short "guide", which
summarizes the contents of the chapter.
Device functions, which are set or prepared by the manufacturer
according to customer specifications and can be set or changed
using the NRI PC programming station (see Chap. 7 "The PC
programming station WinEMP" and product accessory pages on the
internet (www.nri24.com).
7