G-13.mft parallel - NRI
G-13.mft parallel - NRI
G-13.mft parallel - NRI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STARTING UP G-<strong>13.mft</strong> totalizer<br />
5 Starting up<br />
This chapter describes how to:<br />
• start up the G-<strong>13.mft</strong> totalizer in a machine<br />
• install the <strong>NRI</strong> sorting device<br />
Installing totalizer in the machine<br />
To install the G-<strong>13.mft</strong> in a machine with <strong>parallel</strong> interface:<br />
1 Set the price(s) using the switching blocks on the rear of the device<br />
(see section "Function and operation of the 1/2-price totalizer/timer/<br />
TV totalizer" in Chap. 4).<br />
2 If necessary, set the timer time (see section "Function and operation<br />
of the timer" in Chap. 4).<br />
3 If necessary, set the pulse pause time (see section "Function and<br />
operation of the TV totalizer" in Chap. 4).<br />
4 If necessary, install the sorting device on the totalizer (see section<br />
"Installation of the sorting device ..." in this chapter).<br />
5 Disconnect the machine from the power supply.<br />
50 National Rejectors, Inc. GmbH, Buxtehude
Change language