G-13.mft parallel - NRI

More documents

Recommendations

Info

FUNCTION AND OPERATION G-13.mft totalizer Sorting with NRI sorting device When the optional NRI sorting device is used (see also product pages on the internet (www.nri24.com)), the individual coin types can be distributed regardless of their dimensions among the three sorting chutes. Each chute can be defined as a cash-box chute. For details on how to connect the NRI sorting device to the totalizer, see Chap. 5 "Starting up". The following table shows which sorting control line must be activated in order to sort coins into a specific sorting chute: Sorting chute Sorting control line Left 1 Middle – Right 2 48 National Rejectors, Inc. GmbH, Buxtehude L M R
G-13.mft totalizer FUNCTION AND OPERATION Options The G-13.mft totalizer can optionally be equipped for the following applications at the manufacturer. Battery or low-power applications If the G-13.mft is to be used independent of the mains in battery-operated machines, it can optionally be fitted with a wake-up sensor (not available for retrofitting). The wake-up sensor monitors the insertion area of the totalizer. The first coin inserted wakes up the totalizer. The coin is measured and accepted or rejected, a possible credit or timer time is processed. If the vending process is completed, the totalizer returns to sleep mode after 3.5 sec. A credit which is not honoured is stored for 5 min. after the last coin has been inserted (battery protection) before the totalizer returns to sleep mode. The current consumption in sleep mode is less than 15 µA until the unit is woken up again by insertion of a coin. (See section "Interfaces" in Chap. 8 "Technical Data") Credit dwell time: Possible setting: 1–25 min., standard setting: 5 min. If the device is in teach mode, it remains awake until the coin/token is taught, i.e. the teach mode is switched off again. At the factory the totalizer can optionally be set, so that it transmits a wakeup signal to the machine via the return signal line, as soon as it is woken up by insertion of a coin (not ECV totalizer). High-voltage applications up to 42 V If the totalizer is to be supplied with more than 10–16 V, at the factory it can be equipped with a switching power supply which makes a supply voltage of up to 42 V possible (not available for retrofitting). National Rejectors, Inc. GmbH, Buxtehude 49
Page 1: Technical Documentation CRANE Elect
Page 4 and 5: TABLE OF CONTENTS G-13.mft totalize
Page 6 and 7: TABLE OF CONTENTS G-13.mft totalize
Page 8 and 9: GENERAL INFORMATION G-13.mft totali
Page 10 and 11: SAFETY INSTRUCTIONS G-13.mft totali
Page 12 and 13: DESIGN G-13.mft totalizer 3 Design
Page 14 and 15: DESIGN G-13.mft totalizer The coin
Page 16 and 17: DESIGN G-13.mft totalizer Label The
Page 18 and 19: FUNCTION AND OPERATION G-13.mft tot
Page 20 and 21: FUNCTION AND OPERATION (1-/2-PRICE
Page 22 and 23: FUNCTION AND OPERATION (1-/2-PRICE
Page 24 and 25: FUNCTION AND OPERATION (TIMER) G-13
Page 30 and 31: FUNCTION AND OPERATION (TV TOTALIZE
Page 50 and 51: STARTING UP G-13.mft totalizer 5 St
Page 52 and 53: STARTING UP G-13.mft totalizer Inst
Page 54 and 55: STARTING UP G-13.mft totalizer ...
Page 56 and 57: MAINTENANCE AND SERVICE G-13.mft to
Page 58 and 59: THE PC PROGRAMMING STATION WINEMP G
Page 60 and 61: TECHNICAL DATA G-13.mft totalizer 8
Page 62 and 63: TECHNICAL DATA G-13.mft totalizer I
Page 64 and 65: TECHNICAL DATA G-13.mft totalizer G
Page 66 and 67: TECHNICAL DATA G-13.mft totalizer G
Page 68 and 69: INDEX G-13.mft totalizer Index 1/2-
Page 70 and 71: INDEX G-13.mft totalizer I Inhibit
Page 72 and 73: INDEX G-13.mft totalizer T Teach Co
Page 74 and 75: GLOSSARY G-13.mft totalizer ECV Ele

G-13.mft parallel - NRI

Create successful ePaper yourself

Delete template?

Save as template?