G-13.mft parallel - NRI

G-13.mft totalizer FUNCTION AND OPERATION
... with single block data-management
To inhibit the coin channels, the totalizer must be switched from the
operating mode into the setting mode first (DIL switch S1.9). Coin channels
can then be inhibited using the first eight DIL switches S1.1–S1.8 of the
upper switching block. The label shows which coin types are assigned to the
DIL switches and can be inhibited. Several coin channels can also be
assigned to one switch. This switch will then inhibit a coin group (e.g. all coin
channels of a currency, all acceptance bands of a coin type (normal and
narrow ones)).
Assignment DIL switch – coin type/coin group
If all coin types assigned to the DIL switches are to be accepted for payment
at the machine, the DIL switches must be in the lower position (on OFF).If
you want to inhibit a coin channel, you only need to move the respective DIL
switch toward the top to ON.
National Rejectors, Inc. GmbH, Buxtehude
Any coin types or tokens that may have been taught in coin
channels 25 to 32 are inhibited using the DIL switches of the lower
switching block S2.1–8 (see section "Teach mode" in this chapter).
The following examples are designed to illustrate the procedure using the
label. The label shows the manufacturer’s assignment of coin type/coin
group.
41