G-13.mft parallel - NRI

FUNCTION AND OPERATION (TV TOTALIZER) G-13.mft totalizer
Timed output mode
Display indication
Tokens
If a game is not to be activated via a short signal but rather via a constant
signal, you can, in the timed output mode, use the lower switching block to
set a period of time for a game (see section "Set the timer time").
The machine display then shows the elapsing time for a game. After the time
has elapsed, either the number of games still available with the credit are
shown or the residual credit is shown (see also section "Data-manage the
residual credit").
Activate/deactivate timed output mode
If the timed output mode is active, the lower switching block can no
longer be used to set discounts (cp. also section "Discounts").
The machine display shows the credit until it reaches the price for a game.
Afterwards, the number of purchased games are shown (incl. bonus
games). Whenever the customer uses the start button to activate a game,
the elapsing time is shown first, and then the indication is reduced by one
game. If no further game can be started, the display jumps back to zero or
shows a residual credit.
Example
Price = EUR 1 for one game of 60 sec. each
Credit (in EUR) Number of games Display indication
up to 1.00 – 0.50 (e.g.)
1,00 1 x 60 sec. 1 → Start button → 0-60 → 0-01 → 0.00
5,50 5 x 60 sec. 5 → Start button → 0-60 → 0-01 → 4 →
Start button → 0-60 → 0-01 → 3 →
Start button → 0-60 → 0-01 → 2 →
Start button → 0-60 → 0-01 → 1 →
Start button → 0-60 → 0-01 → 0.50
Each coin channel can also be assigned a token instead of a coin; this token
is not assigned an arbitrary value but the value of the price (one game for one
token). Following the acceptance of a token, the customer’s credit therefore
increases by the set price.
Several tokens can be configured.
36 National Rejectors, Inc. GmbH, Buxtehude