G-13.mft parallel - NRI

G-13.mft totalizer FUNCTION AND OPERATION (TIMER)
Tokens
Inventory function
Each coin channel can also be assigned a token instead of a coin; this token
is not assigned an arbitrary value but the value of the price (one service/timer
time for one token). Following the acceptance of a token, the customer’s
credit therefore increases by the set price.
Several tokens can be configured.
If the inventory function has been activated, the timer transmits inventory
pulses for every coin inserted via the 2 nd price line (in this case: inventory
signal line). The pulse number per coin equals the multiple of the smallest
coin value set for this coin.
The inventory pulses can be added up using an external counter and serve
the purpose of verifying the cash-box contents.
Activate/deactivate inventory function
Warning signal before time lapse
National Rejectors, Inc. GmbH, Buxtehude
The inventory function and the output of a warning signal can only be
used alternatively und not combined, as the signals are transmitted
using the same line (see section "Warning signal before time lapse"
in this chapter).
At the manufacturer the timer can be set so that it sends a warning signal
via the second price line (here: warning signal line), before the timer time
purchased has elapsed. Thus the customer's attention is drawn to the fact
that he has to insert further coins, if the time is to be run on.
The purchased time determines when the warning signal is transmitted:
Timer purchased Signal ... before time has elapsed
– 59 sec. no signal
1 min. – 9 min. 59 sec. 30 sec.
10 min. – 59 min. 59 sec. 1 min.
1 h – 10 min.
Activate/deactivate warning signal output
The output of a warning signal and the inventory function can only be
used alternatively and not combined, as the signals are transmitted
using the same line (see section "Warning signal before time lapse"
in this chapter).
27