G-13.mft parallel - NRI

G-13.mft totalizer FUNCTION AND OPERATION (TIMER)
Set the timer time
The timer sells a service over a specific period of time. You can set the time
available to a customer for the credit of the set price as a binary value using
the lower switching block S2:
S2.1...S2.8, S2.10
DIL switch S2.10 defines the unit of time (seconds (ON) or minutes (OFF)).
Example – time unit "minutes"
The timer is to be set to a time of 15 min. A valency of 15 must therefore be set using
the DIL switches.
Valency 1 2 48 16 32 64128
Time = 8 + 4 + 2 + 1 = 15
To set a timer time of 15 min., the DIL switches 1 to 4 of the lower switching block
S2 must be set upward to ON and DIL switch 10 downward (to OFF)!
Example – time unit "seconds"
The timer is to be set to a time of 200 sec. A valency of 200 must therefore be set
using the DIL switches.
Valency 1 2 48 16 32 64128
Time = 128 +64 +8 = 200
To set a timer time of 200 sec., the DIL switches 4, 7, 8 and 10 of the lower
switching block S2 must be set upward to ON!
National Rejectors, Inc. GmbH, Buxtehude
S1
S2
25