G-13.mft parallel - NRI

FUNCTION AND OPERATION (1-/2-PRICE TOTALIZER) G-13.mft totalizer
Data-manage the residual credit (only 1-price totalizer)
Free vend
Deactivate price
Tokens
If, for a vending operation, an amount of money is inserted into the device that
is greater than the set price, the customer’s residual credit can be datamanaged
in a number of ways:
• Reset residual credit immediately (single vend)
Residual credit is reset immediately after the vending operation
• Retain residual credit (multiple vend)
Residual credit can be used for another vend or another customer
• Retain residual credit for two minutes (time-dependent multi vend)
Residual credit is reset two minutes after the vending operation
If two prices have been set on a totalizer and if a multi vend option
has been selected, the second price that has been set will not be
taken into account.
Changing the residual credit data-management
For free vending operations, all price switches must be set downward (to
OFF) (see section "Set the price(s)"). In that case, the respective price line
is constantly active.
To deactivate the second price for the 1-price totalizer operation, all price
switches of the lower switching block must be set upward to ON (see
section "Set the price(s)").
Each coin channel can also be assigned a token instead of a coin; this token
is assigned an arbitrary value or the value of a price (one product for one
token). Following the acceptance of a token, the customer’s credit increases
by the set price.
The 2-price totalizer makes a distinction between a second token for the
second product.
Several tokens can be configured.
22 National Rejectors, Inc. GmbH, Buxtehude