G-13.mft parallel - NRI

More documents

Recommendations

Info

FUNCTION AND OPERATION (1-/2-PRICE TOTALIZER) G-13.mft totalizer Function and operation of the 1-/2-price totalizer This section describes the functions and their adjustment, which characterize the 1-/2-price totalizer operation: • Vending sequence • Set the prices • Data-manage the residual credit • Free vend • Deactivate price • Tokens Vending sequence 1-price totalizer 2-price totalizer Since the vending sequence of the 1-price totalizer differs from the one of the 2-price totalizer, the vending sequence will be described in two separate sections. On the totalizer, the value of an accepted coin is added to the customer’s current credit in each case. When the price is reached or exceeded, price line 1 is activated. After completion of the handing-out of goods, the machine informs the totalizer via the reset line that the customer’s credit must either be reduced by the amount of the price (multi vend) or be reset (single vend). If "single vend" has been configured, no further coins are accepted when the price is reached (see also section "Data-managing the residual credit"). On the totalizer, the value of an accepted coin is added to the customer’s current credit in each case. When the first or second price is reached or exceeded, price line 1 or 2 is activated respectively. If both price lines are active, i.e. the higher price has also be reached or exceeded, no further coins will be accepted. After completion of the handing-out of goods, the machine informs the totalizer via the reset line that the customer’s credit must be reset, which means that any residual credit will be lost. 20 National Rejectors, Inc. GmbH, Buxtehude
G-13.mft totalizer FUNCTION AND OPERATION (1-/2-PRICE TOTALIZER) Set the price(s) On the G-13.mft totalizer, one or two prices can be set as binary values using the switching blocks: Price setting for 1-price totalizer S1.1...S1.8 Price setting for 2-price totalizer S1.1...S1.8 for price 1 S2.1...S2.8 for price 2 The price is set in binary form as a multiple of the smallest programmed coin. National Rejectors, Inc. GmbH, Buxtehude The smallest programmed coin value is listed with all other coin values on the label. Changing the smallest coin value Example The totalizer is to be set to a price of 1.00 Euro, and the smallest coin value is 0.05 Euro. A binary value of 20 must therefore be set using the DIL switches (20 x 0.05 EUR = 1.00 EUR). Valency 1 2 48 16 32 64128 Price (Euro) = (16 + 4) x 0.05 = 20 x 0.05 = 1.00 To set a price of 1.00 Euro, the DIL switches 3 and 5 of the upper or lower switching block must be set upward to ON! S1 S2 S1 S2 21
Page 1: Technical Documentation CRANE Elect
Page 4 and 5: TABLE OF CONTENTS G-13.mft totalize
Page 6 and 7: TABLE OF CONTENTS G-13.mft totalize
Page 8 and 9: GENERAL INFORMATION G-13.mft totali
Page 10 and 11: SAFETY INSTRUCTIONS G-13.mft totali
Page 12 and 13: DESIGN G-13.mft totalizer 3 Design
Page 14 and 15: DESIGN G-13.mft totalizer The coin
Page 16 and 17: DESIGN G-13.mft totalizer Label The
Page 18 and 19: FUNCTION AND OPERATION G-13.mft tot
Page 22 and 23: FUNCTION AND OPERATION (1-/2-PRICE
Page 24 and 25: FUNCTION AND OPERATION (TIMER) G-13
Page 30 and 31: FUNCTION AND OPERATION (TV TOTALIZE
Page 50 and 51: STARTING UP G-13.mft totalizer 5 St
Page 52 and 53: STARTING UP G-13.mft totalizer Inst
Page 54 and 55: STARTING UP G-13.mft totalizer ...
Page 56 and 57: MAINTENANCE AND SERVICE G-13.mft to
Page 58 and 59: THE PC PROGRAMMING STATION WINEMP G
Page 60 and 61: TECHNICAL DATA G-13.mft totalizer 8
Page 62 and 63: TECHNICAL DATA G-13.mft totalizer I
Page 64 and 65: TECHNICAL DATA G-13.mft totalizer G
Page 66 and 67: TECHNICAL DATA G-13.mft totalizer G
Page 68 and 69: INDEX G-13.mft totalizer Index 1/2-
Page 70 and 71:
INDEX G-13.mft totalizer I Inhibit
Page 72 and 73:
INDEX G-13.mft totalizer T Teach Co
Page 74 and 75:
GLOSSARY G-13.mft totalizer ECV Ele
show all

G-13.mft parallel - NRI

Create successful ePaper yourself

Delete template?

Save as template?