G-13.mft parallel - NRI

FUNCTION AND OPERATION (1-/2-PRICE TOTALIZER) G-13.mft totalizer
Function and operation of the 1-/2-price totalizer
This section describes the functions and their adjustment, which characterize
the 1-/2-price totalizer operation:
• Vending sequence
• Set the prices
• Data-manage the residual credit
• Free vend
• Deactivate price
• Tokens
Vending sequence
1-price totalizer
2-price totalizer
Since the vending sequence of the 1-price totalizer differs from the one of
the 2-price totalizer, the vending sequence will be described in two separate
sections.
On the totalizer, the value of an accepted coin is added to the customer’s
current credit in each case.
When the price is reached or exceeded, price line 1 is activated. After
completion of the handing-out of goods, the machine informs the totalizer via
the reset line that the customer’s credit must either be reduced by the
amount of the price (multi vend) or be reset (single vend). If "single vend" has
been configured, no further coins are accepted when the price is reached
(see also section "Data-managing the residual credit").
On the totalizer, the value of an accepted coin is added to the customer’s
current credit in each case.
When the first or second price is reached or exceeded, price line 1 or 2 is
activated respectively. If both price lines are active, i.e. the higher price has
also be reached or exceeded, no further coins will be accepted. After
completion of the handing-out of goods, the machine informs the totalizer via
the reset line that the customer’s credit must be reset, which means that any
residual credit will be lost.
20 National Rejectors, Inc. GmbH, Buxtehude