HMD 46 Manual (pdf)
HMD 46 Manual (pdf) HMD 46 Manual (pdf)
Flipping away one earcup The headset features a “flip-away” earcup for singlesided listening. Adjusting the volume directly on the audio system Connect the headset to the corresponding sockets of your audio system. Adjust the volume directly on the audio system. CAUTION! Hearing damage due to high volumes! This headset is capable of producing high sound pressure levels. Higher volumes or longer durations can damage your hearing! Set the volume to a medium level. Make sure that you can hear critical sounds such as warning alarms. 6
Adjusting the microphone sensitivity The microphone sensitivity has been factory pre-set to 80 mV/Pa as per RTCA DO-214. You can change the microphone sensitivity by turning a small screwdriver in the direction of the arrow. + – 7
- Page 1: Instructions for use Air Traffic Co
- Page 4 and 5: Intended use of the headset Intende
- Page 6 and 7: Delivery includes HMD 46 / HME 46
- Page 10 and 11: Care and maintenance Cleaning the h
- Page 12 and 13: Product variants Variant (Cat. No.)
- Page 14 and 15: Cable -L 4 9 1 5 10 6 8 7 Solder si
- Page 16 and 17: Specifications HMD 46-3 Headphones
- Page 18 and 19: Specifications HMD 46-31 Headphones
- Page 20: Manufacturer Declarations Warranty
Adjusting the microphone sensitivity<br />
The microphone sensitivity has been factory pre-set to<br />
80 mV/Pa as per RTCA DO-214. You can change the<br />
microphone sensitivity by turning a small screwdriver in<br />
the direction of the arrow.<br />
+<br />
–<br />
7