Sivoia QED® |specification guide - Loyola Enterprises Inc. Audio ...

Sivoia QED® |specification guide - Loyola Enterprises Inc. Audio ... Sivoia QED® |specification guide - Loyola Enterprises Inc. Audio ...

av.loyola.com
from av.loyola.com More from this publisher
30.06.2013 Views

Sivoia QED® | roller shade system selection guide Determine how roller shade will be installed p Inside mount p Outside mount p Wall mount p Ceiling mount p Jamb mount p Pocket mount (Recess) 10 | Lutron Take system measurements Roller shade size = system height ______ x system width _______ (bracket to bracket) Operator required: p roller 20TM For shades up to 20 sq. ft. (1.86 sq. m) Minimum width: 18.5 in. (470 mm) Maximum width*: 8 ft. (2400 mm) Maximum height*: 8 ft. (2400 mm) p roller 64TM For shades up to 64 sq. ft. (5.95 sq. m) Minimum width: 18.5 in. (470 mm) Maximum width*: 8 ft. (2400 mm) Maximum height*: 8 ft. (2400 mm) p roller 100TM For shades up to 100 sq. ft. (9.29 sq. m) Minimum width: 24 in. (610 mm) Maximum width*: 10 ft. (3000 mm) Maximum height*: 10 ft. (3000 mm) p roller 225TM For shades up to 225 sq. ft. (20.9 sq. m) Minimum width: 31.62 in. (803 mm) Maximum width*: 15 ft. (4600 mm) Maximum height*: 15 ft. (4600 mm) Specify drive location for pre-wiring p Left drive p Right drive p TBD Specify wiring topology p Individual transformers (recommended for installations requiring local wiring) p Power panel (recommended for installations requiring centralized wiring) * Maximum shade size may vary based on fabric selection. Contact customer service or use SCT for actual shade dimensions based on fabric type.

Sivoia QED® | roller shade system selection guide Specify fabric roll detail p Regular (standard) p Reverse ( recommended for applications where objects such as handles or levers protrude from the window and may interfere with shade travel) p TBD glass glass Specify fabric p SheerShade® Fabrics feature open weaves, so sunlight is filtered while preserving the view. p Privacy These fabrics permit some light, but are not open weaves, so the view is limited to shapes and shadows. p Blackout These fabrics prevent all light from passing through the material. Specify lineal requirements p Fascia p Pocket with flap p Flap and hanger only p Top back cover Blackout options p Side channels p Sill angle Specify control For standalone systems: Keypad style: p Architectural p Designer Keypad configuration (refer to pg. 72): p Open/close p Raise/Lower p Preset 1 p Preset 2 p Preset 3 p IR receiver p Dual shade control Color (refer to pg. 71) p Plastic color________________ p Metal finish________________ p Infra-red transmitter p Dry contact input from third-party systems For total lighting control: p GRAFIK Eye® (room control) p HomeWorks® (whole home control) p RadioRA® (whole home control) p GRAFIK® systems (total building control) p QuantumTM (PC-based control) Lutron | 11

<strong>Sivoia</strong> <strong>QED®</strong> | roller shade system selection <strong>guide</strong><br />

Specify<br />

fabric<br />

roll detail<br />

p Regular<br />

(standard)<br />

p Reverse<br />

( recommended for<br />

applications where<br />

objects such as<br />

handles or levers<br />

protrude from the<br />

window and may<br />

interfere with<br />

shade travel)<br />

p TBD<br />

glass<br />

glass<br />

Specify<br />

fabric<br />

p SheerShade®<br />

Fabrics feature open<br />

weaves, so sunlight is<br />

filtered while preserving<br />

the view.<br />

p Privacy<br />

These fabrics permit<br />

some light, but are<br />

not open weaves, so<br />

the view is limited to<br />

shapes and shadows.<br />

p Blackout<br />

These fabrics prevent<br />

all light from passing<br />

through the material.<br />

Specify<br />

lineal<br />

requirements<br />

p Fascia<br />

p Pocket with flap<br />

p Flap and<br />

hanger only<br />

p Top back cover<br />

Blackout options<br />

p Side channels<br />

p Sill angle<br />

Specify<br />

control<br />

For standalone systems:<br />

Keypad style:<br />

p Architectural<br />

p Designer<br />

Keypad configuration<br />

(refer to pg. 72):<br />

p Open/close<br />

p Raise/Lower<br />

p Preset 1<br />

p Preset 2<br />

p Preset 3<br />

p IR receiver<br />

p Dual shade control<br />

Color (refer to pg. 71)<br />

p Plastic<br />

color________________<br />

p Metal<br />

finish________________<br />

p Infra-red transmitter<br />

p Dry contact input from<br />

third-party systems<br />

For total lighting control:<br />

p GRAFIK Eye® (room control)<br />

p HomeWorks®<br />

(whole home control)<br />

p RadioRA®<br />

(whole home control)<br />

p GRAFIK® systems<br />

(total building control)<br />

p QuantumTM<br />

(PC-based control)<br />

Lutron | 11

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!