Data Queue APIs--Categories - FTP Directory Listing - IBM

Send Data Queue (QSNDDTAQ) API
INPUT; CHAR(*)
The data sent to the data queue. This value must be at least as long as the value specified in the
length of key data parameter; otherwise, unexpected results can occur.
Optional Parameter Group 2
Asynchronous request
INPUT; CHAR(10)
Whether the send data queue request to a DDM data queue should be processed asynchronously.
This parameter only applies to DDM data queues. Valid values are *YES and *NO. An error will
occur if *YES is specified for a non-DDM data queue. If the value *YES is specified for the
asynchronous request parameter for a DDM data queue and an error occurs on the operation, the
error will not be detected until the next time the data queue is accessed.
Note: If this parameter is specified, the key length and key data parameters must also be specified
even if they are not applicable. In that event, the key length should be zero and blanks should be
specified for the key data.
Usage Notes
This API can be used in a multithreaded job to receive messages from a local data queue. It cannot be used
in a job that allows multiple threads to receive messages from a DDM data queue.
Error Messages
CPF2207 E
Not authorized to use object &1 in library &3 type *&2.
CPF24B4 E
Severe error while addressing parameter list.
CPF2498 E
Invalid length. MAXLEN for data queue &1 in &2 is &3.
CPF3C90 E
Literal value cannot be changed.
CPF6565 E
User profile storage limit exceeded.
CPF9501 E
Data queue &1 in &2 requires a key value.
CPF9502 E
Key length must be zero for data queue &1 in &2.
CPF9503 E
Cannot lock data queue &1 in &2.
http://infocntr.rchland.ibm.com/pubs/html/as400/v4r5/ic2924/info/apis/qsnddtaq.htm (4 of 5) [10/4/1999 2:32:39 PM]