File Management - IBM

36 File Management V4R5
output queue could be changed before sign-off using the OUTQ parameter on the
Change Job (CHGJOB) command to specify the name of the output queue for the
job. If the printer file for the job log contains the value *JOB for the output queue,
the output queue is the one that is specified for the job.
The following commands allow overrides for the SRCFILE and SRCMBR
parameters only:
CRTCMD CRTPRTF
CRTICFF CRTSRCPF
CRTDSPF CRTTBL
CRTLF CRTPF
CRTXXXPGM
(All create program commands. These commands also use overrides to determine which file
will be opened by a compiled program. See “Applying overrides when compiling a
program” on page 53 for more information.)
The following command allows overrides for the TOFILE, MBR, SEQONLY,
LVLCHK, and INHWRT parameters:
OPNQRYF
The following commands allow overrides, but do not allow changing the MBR to
*ALL:
CPYFRMPCD CPYTOPCD
The following commands do not allow overrides to affect the display files that
they use. Overrides to the printer files they use should not change the file type or
the file name. Some restrictions are placed on changes that may be made to printer
files used by these commands, but the system can not guarantee that all
combinations of possible specifications will produce an acceptable report.
DMPOBJ and DMPSYSOBJ
(In addition to the preceding limitations, these commands do not allow
overrides to the file they dump.)
DSPXXXXXX
(All display commands. The display commands that display information
about a file do not allow overrides to that file.)
DSPIGCDCT
EDTIGCDCT
GO (You can override message files.)
PRTXXXXXX
(All print commands.)
QRYDTA
TRCXXX
(All trace commands.)
WRKXXXXXX
(All work-with commands.)