File Management - IBM

conversion because the system displays the related words in the same order in
which those words are listed in the dictionary.
Displaying and printing the DBCS conversion dictionary
Use the Display DBCS Conversion Dictionary (DSPIGCDCT) command to display
and print the DBCS conversion dictionary. You can display or print the entire
dictionary or just a certain part of it, depending on the value you specify for the
ENTRY parameter.
For example, to print the entry ABC from the dictionary QUSRIGCDCT and its
related words, enter:
DSPIGCDCT IGCDCT(DBCSLIB/QUSRIGCDCT) +
ENTRY(ABC) OUTPUT(*PRINT)
To display all of the entries from the system-supplied dictionary QSYSIGCDCT
and their related words, enter:
DSPIGCDCT IGCDCT(QSYS/QSYSIGCDCT)
Figure 22 on page 228 provides an example of the display produced by the
DSPIGCDCT command. It shows alphanumeric entries and their related words.
See the discussion of the DSPIGCDCT command in the CL Reference for a
complete description of the command and the display it produces.
Deleting a DBCS conversion dictionary
Use the Delete DBCS Conversion Dictionary (DLTIGCDCT) command to delete a
DBCS conversion dictionary from the system.
In order to delete the dictionary, you must have object existence authority to the
dictionary and object operational authorities to the library in which the dictionary
is stored.
When you delete a dictionary, make sure that you specify the correct library name.
It is possible that many users have their own dictionaries, each named
QUSRIGCDCT, stored in their libraries. If you do not specify any library name, the
system deletes the first DBCS conversion dictionary in your library list.
For example, to delete the DBCS conversion dictionary QUSRIGCDCT in the
library DBCSLIB, enter:
DLTIGCDCT IGCDCT(DBCSLIB/QUSRIGCDCT)
Appendix B. Double-byte character set support 227