File Management - IBM

another alphanumeric entry in the entry field to continue adding entries to the
dictionary, or press F3 to end editing the dictionary.
Moving a related word in a DBCS conversion dictionary: Moving the words
related to an alphanumeric entry changes the order in which the words appear
during DBCS conversion. To move a word, do the following:
1. Display the Edit Related Words display for the entry in which you want to
move DBCS words, either by entering a specific entry with the EDTIGCDCT
command, or by choosing an entry to edit from the Work with DBCS
Conversion Dictionary display.
2. When the display appears, enter an M in the NBR field beside the DBCS word
to be moved.
3. Enter an A in the NBR field of the line after which the word will be moved.
4. Press the Enter key. The system moves the word on the line marked M to a
position immediately following the line marked with an A.
Deleting an entry in a DBCS conversion dictionary: Enter a 4 in the input field
beside the entry to be deleted as shown in Figure 21.
Ending the editing process in a DBCS conversion dictionary: To end the editing
operation, press F3. The Exit Dictionary Entry display is displayed, and you can
choose to save the entry or not. The system then returns you to your basic working
display, such as the Command Entry display.
Suggestions for editing a DBCS conversion dictionary: When editing the DBCS
conversion dictionary, consider the following:
v You can use DBCS conversion with the Edit Related Words display to enter
related words into a user-created dictionary. See “DBCS conversion (for Japanese
use only)” on page 228 for information on this procedure.
Figure 21. Display for Deleting a Conversion Dictionary Entry
226 File Management V4R5
HRSLS331-2
v Place the most commonly used DBCS words at the beginning of the list of
related words on the Edit Related Words display. This simplifies DBCS