File Management - IBM

Table 24. I/O Feedback Area for ICF and Display Files (continued)
Offset Data Type Length Contents File Type
36 Character 2 Minor return code. For the values for a display
file, see the Application Display Programming book.
For the values for an ICF file, see the ICF
Programming book and the appropriate
communications-type programmer’s guide.
Display, ICF
38 Character 8 Systems Network Architecture (SNA) sense
return code. For some return codes, this field may
contain more detailed information about the
reason for the error. For a description of the SNA
sense codes, see the appropriate SNA book.
ICF
46 Character 1 Safe indicator:
ICF
0 An end-of-text (ETX) control character
has not been received.
1 An ETX control character has been
received.
47 Character 1 Reserved.
48 Character 1 Request Write (RQSWRT) command from remote
system/application.
0 RQSWRT not received
1 RQSWRT received
49 Character 10 Record format name received from the remote
system.
ICF
59 Character 4 Reserved.
63 Character 8 Mode name. ICF
71 Character 9 Reserved.
I/O feedback area for printer files
Table 25. I/O Feedback Area for Printer Files
Offset Data Type Length Contents
0 Binary 2 Current line number in a page.
2 Binary 4 Current page count.
6 Character 1 Bit 1: Spooled file has been deleted:
ICF
1 The spooled file has been deleted.
0 The spooled file has not been deleted.
Bits2-8:Reserved.
7 Character 27 Reserved.
34 Character 2 Major return code.
00 Operation completed successfully.
80 Permanent system or file error.
81 Permanent device error.
82 Open operation failed.
83 Recoverable device error occurred.
36 Character 2 Minor return code. For the values for a printer
file, refer to the Printer Device Programming.
188 File Management V4R5