Standard Bus Procurement Guidelines - APTAStandards.com

More documents

Recommendations

Info

Standard Bus Procurement Guidelines 5.4.3.11 Numbering And Signing: The exact wording, size, color, and location for these signs are found with requirements for other special signs in attachments to Part 5: Technical Specifications. 5.4.3.12 Exterior Lighting: Specific number and mounting requirements are defined in attachments to Part 5: Technical Specifications. 5.4.4 Interior Panels and Finishes 5.4.4.3 Rear End: Colors, patterns, and materials are defined in attachments to Part 5: Technical Specifications. 5.4.4.4 Interior Panels 5.4.4.4.1 General: All materials shall comply with the Recommended Fire Safety Practices defined in FTA Docket 90, dated October 20,1993. Colors, patterns, and materials for the interior trim are defined in attachments to Part 5: Technical Specifications. 5.4.4.4.5 Headlining: Colors, patterns, and materials for the headlining are defined in attachments in Part 5: Technical Specifications. 5.4.4.5 Floor Covering: Color and material of the floor covering is defined in attachment to Part 5: Technical Specifications. 5.4.4.7 Fare Collection: The fare box, including make, model, size, weight, and meter locations, is described in attachments to Part 5: Technical Specifications. [Transfer] equipment is defined in attachments to Part 5: Technical Specifications. 5.4.5 Passenger Accommodations 5.4.5.1 Passenger Seating 5.4.5.1.4 Construction and Materials: Color of the seat material and optional safety padding is defined in attachments to Part 5: Technical Specifications. Colors, fabrics, and patterns for the seats and all interior trim is defined in attachments to Part 5: Technical Specifications. 5.4.5.4 Accessibility Provisions 5.4.5.4.1 General: Specific requirements, including the number of wheelchairs to be accommodated, the tiedown and securement devices, and fold-down seats, are provided in attachments to Part 5: Technical Specifications. 5.4.6 Operator Provisions 5.4.6.5.2 Structure and Materials: Color of the operator's seat is defined in the attachments to Part 5: Technical Specifications. 5.4.7 Windows Technical Specifications 196 10/18/07
Standard Bus Procurement Guidelines 5.4.7.4.1 Dimensions (Cyclone cleaner opening): Minimum size of this opening is defined in attachment to Part 5: Technical Specifications. 5.4.8 Heating, Ventilating, and Air Conditioning 5.4.8.5 Roof Ventilators: The requirements for location of these additional roof ventilators shall also be included in the attachment. 5.4.9 Signage and Communication 5.4.9.1.1 Destination Signs: Message program information shall be transferable to and/or from the field programmer device as specified by the Procuring Agency in attachments to Part 5: Technical Specifications. A complete listing of destination sign readings for initial sign programming by the manufacturer are provided in attachments to Part 5: Technical Specifications. 5.4.9.1.2 Block Numbers: The list of required sign readings is defined in attachments to Part 5: Technical Specifications. 5.4.9.2.2: (Additional requirements for exterior advertising may be defined in the attachments to Part 5: Technical Specifications.) 5.5 Electrical system 5.5.1 General Requirements: Electrical power provided for the fare collection device and the radio compartment shall be 12 and/or 24 volts DC as specified in attachments to Part 5: Technical Specifications. 5.5.8 Master Battery Switch: Any equipment that requires power without reference to the master battery switch shall be listed in attachments to Part 5: Technical Specifications. Technical Specifications 197 10/18/07
Page 1:
American Public Transit Association
Page 6 and 7:
Standard Bus Procurement Guidelines
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
1. 2. 3. 4. 5. 6. 7. 8. Standard Bu
Page 120 and 121:
1. 2. Standard Bus Procurement Guid
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158: Standard Bus Procurement Guidelines
Page 207: Standard Bus Procurement Guidelines
show all

Standard Bus Procurement Guidelines - APTAStandards.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?